소개

This guide will help in determining if the cooling fan is broken and how to fix or replace it.

Move the latch to the right of the battery to unlock.
  • Move the latch to the right of the battery to unlock.

댓글 쓰기

Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.
  • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

  • The latch must be held in position to remove the battery.

댓글 쓰기

Unscrew the indicated Philips screw. Screw cannot be completely removed from cover.
  • Unscrew the indicated Philips screw.

    • Screw cannot be completely removed from cover.

댓글 쓰기

Use the spudger to pry open the cover.
  • Use the spudger to pry open the cover.

    • There will be three tabs on each side except for the side with the screw.

댓글 쓰기

Unscrew the six indicated Philips screws. These screws cannot be completely removed from the cooling fan component.
  • Unscrew the six indicated Philips screws.

    • These screws cannot be completely removed from the cooling fan component.

댓글 쓰기

Unplug the shown cable attaching the cooling fan to the computer.
  • Unplug the shown cable attaching the cooling fan to the computer.

댓글 쓰기

You are now able to remove the cooling fan.
  • You are now able to remove the cooling fan.

It looks like you removed the heat sink with the fan, is it possible to remove the fan alone? How are they connected?

Alex Jansen - 답글

How do you detach the fan at the #1 screw to switch it out and put a new fan in?

Leslie Jones - 답글

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Diego Carteno

회원 가입일: 2010년 04월 15일

247 평판

안내서 7개 작성하였습니다

Cal Poly, Team 24-20, Regan Spring 2010 Cal Poly, Team 24-20, Regan Spring 2010 회원

CPSU-REGAN-S10S24G20

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 7

전체 시간: 12,770