물건을 수리하세요 커뮤니티 상점

GoPro Hero LCD Screen Replacement

소개

If for some reason, your screen is dysfunctional, you can replace it. Since it is near the bottom of the camera, it is not easy to replace. Grab your screwdrivers and tweezers and let's go!

필요한 것

  1. GoPro Hero LCD Screen Replacement, Casing: 1 단계, 이미지 1개 중 1개

    • Power off your GoPro before beginning disassembly.

    • Unclip the black latch to the camera case and open the case.

    편집

  2. GoPro Hero LCD Screen Replacement: 2 단계, 이미지 1개 중 1개

    • Gently pry the back open by inserting a metal spudger between the case and back panel.

    편집

  3. GoPro Hero LCD Screen Replacement: 3 단계, 이미지 1개 중 1개

    • Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.

    편집

  4. GoPro Hero LCD Screen Replacement: 4 단계, 이미지 1개 중 1개

    • Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.

    편집

  6. GoPro Hero LCD Screen Replacement: 5 단계, 이미지 1개 중 1개

    • Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.

    • Make sure to keep track of these screws as they are very small.

    편집

  7. GoPro Hero LCD Screen Replacement: 6 단계, 이미지 1개 중 1개

    • Carefully remove the motherboard and white plastic piece from the case.

    편집

  8. GoPro Hero LCD Screen Replacement, LCD Screen: 7 단계, 이미지 2개 중 1개 GoPro Hero LCD Screen Replacement, LCD Screen: 7 단계, 이미지 2개 중 2개

    • Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket.

    • Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.

    편집

  9. GoPro Hero LCD Screen Replacement: 8 단계, 이미지 1개 중 1개

    • Separate the motherboard from the white piece of plastic.

    편집

  10. GoPro Hero LCD Screen Replacement: 9 단계, 이미지 1개 중 1개

    • Remove the ribbon cable from the motherboard by simply pulling the cable from the socket.

    편집

  11. GoPro Hero LCD Screen Replacement: 10 단계, 이미지 2개 중 1개 GoPro Hero LCD Screen Replacement: 10 단계, 이미지 2개 중 2개

    • Separate the LCD screen from the motherboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

작성자

4다른 기여자 명과 함께

River Drake

회원 가입일: 04/02/15

1,047 평판

안내서 5개를 작성함

배지: 15

배지 +12개 더

팀

Cal Poly, Team 12-2, Lancaster Spring 2015 Cal Poly, Team 12-2, Lancaster Spring 2015 회원

CPSU-LANCASTER-S15S12G2

4 회원들

안내서 18개를 작성함

3가이드 댓글

Where do you buy the replacement lcd

Anthony Volatile - 답글

Gopro hero 7 white repair cost:

Screen: $45 - https://www.ebay.com.au/itm/183828969944

Side panel: $35 - https://www.herogear.com.au/genuine-repl...

Addisen KING -

I can find the screen but is it compatible with the Hero+

Brian Casado - 답글

댓글 쓰기

조회 통계:

지난 24시간: 5

지난 7일: 32

지난 30일: 149

전체 시간: 25,166