주요 콘텐츠로 건너뛰기

HTC One Max Fingerprint Sensor Replacement

필요한 것

  1. HTC One Max Fingerprint Sensor Replacement, Back Case: 1 단계, 이미지 1/1
    • Lift back cover while pressing highlighted release switch towards the center of the phone.

  2. HTC One Max Fingerprint Sensor Replacement: 2 단계, 이미지 1/2 HTC One Max Fingerprint Sensor Replacement: 2 단계, 이미지 2/2
    • Remove the four white stickers in each corner that cover the Tri-Wing screws.

    • Remove the white sticker near the buttons that control the volume.

    • Remove the white sticker near the SIM card.

    • Remove the big white sticker with the bar-code in the center of the phone.

  3. HTC One Max Fingerprint Sensor Replacement: 3 단계, 이미지 1/1
    • Remove the thirteen Tri-Wing Y00 screws (Upper & Lower screws are 5 mm length, middle screws are 3.8 mm length) from the back case.

    • Disconnect the cable near the volume buttons.

  4. HTC One Max Fingerprint Sensor Replacement: 4 단계, 이미지 1/2 HTC One Max Fingerprint Sensor Replacement: 4 단계, 이미지 2/2
    • Use the small plastic opening tool to pry between the screen and the rear case.

  5. HTC One Max Fingerprint Sensor Replacement, Fingerprint Sensor: 5 단계, 이미지 1/2 HTC One Max Fingerprint Sensor Replacement, Fingerprint Sensor: 5 단계, 이미지 2/2
    • Use Tweezers to disconnect the ribbon cable connecting the fingerprint sensor to the motherboard.

    • When replacing the fingerprint sensor, make sure the ribbon cable snaps into the port on the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

Andrey Sklyar

회원 가입일: 09/23/14

452 평판

안내서 2개 작성하였습니다

USF Tampa, Team 11-3, Blackwell Fall 2014 USF Tampa, Team 11-3, Blackwell Fall 2014 회원

USFT-BLACKWELL-F14S11G3

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 1,255