소개

By removing the back plate and disconnecting the bus for the camera, replacing it isn't difficult.

  1. Power the phone off.
    • Power the phone off.

    • Use your thumb to gently press downward and away from the camera to remove the battery cover.

    댓글 쓰기

  2. Pull on the plastic tab to release the battery.
    • Pull on the plastic tab to release the battery.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Use a plastic opening tool to remove the camera cover.

    • Work around the corners to avoid breaking the plastic clips that hold the camera cover on.

    • Lift the camera cover off of the phone.

    댓글 쓰기

    • Remove the stylus from the phone.

    • Remove the four 5.5 mm screws with the T6 Torx Screwdriver.

    • One of the screws might be under a sticker, which will void your warranty.

    댓글 쓰기

    • Be Careful! Do not insert the spudger in between the keyboard and screen. This could break the keyboard off the phone.

    • If your phone contains a memory card, you may want to remove it before proceeding with this step.

    • Insert spudger in the bottom corner as seen in the picture. Carefully slide the spudger from the bottom towards the top as seen in the second picture.

    • Lift the back case off completely.

    • The speakers might be dangling and unsecured.

    댓글 쓰기

    • Locate the camera and pry off with the plastic opening tool or spudger.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Kevin Gingrich

회원 가입일: 2011년 10월 06일

172 평판

안내서 2개 작성하였습니다

Cal Poly, Team 20-28, Maness Fall 2011 Cal Poly, Team 20-28, Maness Fall 2011 회원

CPSU-MANESS-F11S20G28

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 696