-
-
-
Turn the key in the ignition to the run position (right before the start position)
FixBot에 문의하기
-
-
-
Press the SELECT/RESET knob repeatedly until the engine oil life indicator is displayed.
-
-
-
-
Press and hold the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
-
-
-
Press and hold the SELECT/RESET knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100%.
-
-
-
Turn the key in the ignition to the off position, and then start the engine to verify the indicator has been reset.
-
-
You did it!
다른 21명이 해당 안내서를 완성하였습니다.
6가이드 댓글
Great. I did it—and I’m a girl!!
pthompso99 - 답글 공유
Excellent! Glad to hear it.
in my case i followed the step through. 100% oil life was achieved but when i turn the ignition off and turn it back on to verify, it goes back to 15%
