Hoover Power Path Pro Advanced Power Switch Replacement

Remove the lower brushroll from the bottom of the cleaner.

Use a long #2 Philips head to remove the 8 numbered screws on the bottom of the cleaner (They will also be indicated on the bottom of the vacuum).

Pull the red handle to remove the front suction unit from the cleaner.

Unscrew the hose by using a Phillips #2 to detach it from the top cover of the cleaner.

Push down on the handle release button. Lift the edge of top cover connected to this button.

Repeat the above step for the "On/Off" button.

Pull entire top cover off.

Remove the "On/Off" cap by pulling it upwards with caution.

Use a long #2 Philips head to remove the two screws from the arched grey piece.

Pull out the red power the red power switch.