기기를 수리하세요 커뮤니티 상점

Huawei P10 Back Cover Replacement

소개

Use this guide to replace the back cover of your Huawei P10 smartphone.

필요한 것

  1. Huawei P10 Back Cover Replacement, Back Cover: 1 단계, 이미지 1/3 Huawei P10 Back Cover Replacement, Back Cover: 1 단계, 이미지 2/3 Huawei P10 Back Cover Replacement, Back Cover: 1 단계, 이미지 3/3

    • Switch off your phone.

    • Remove the two Pentalobe P2 screws at the bottom.

    • Remove the SIM card tray.

    편집

  3. Huawei P10 Back Cover Replacement: 2 단계, 이미지 1/3 Huawei P10 Back Cover Replacement: 2 단계, 이미지 2/3 Huawei P10 Back Cover Replacement: 2 단계, 이미지 3/3

    • Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.

    • Carefully pry the display with its parts out of the case.

    • Getting the prying tool in will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.

    • After you pried out the bottom end, use the opening tool to open the clamps on both sides.

    편집

  4. Huawei P10 Back Cover Replacement: 3 단계, 이미지 1/2 Huawei P10 Back Cover Replacement: 3 단계, 이미지 2/2

    • Don't open the phone all the way, yet. The cable for the standby and volume buttons is still connected to the back cover.

    • Swing open the phone backwards.

    • Use a spudger to disconnect the power- and volume button flex cable.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Dominik Schnabelrauch

회원 가입일: 11/23/16

203,299 평판

안내서 682개 작성하였습니다

배지: 40

배지 +37개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 16,817개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 10

30일 전: 52

전체 시간: 7,784