Hytera TC-580 Keypad Replacement

Remove the two 10mm Phillips #0 from the belt clip.

Push in the release button and pull up on the battery to remove.

Twist antenna counter-clockwise and set damaged antenna aside.

Remove the volume knob by firmly lifting up on both sides of it.

Remove the orange o-ring around volume knob using tweezers.

Remove grey nut from base of volume knob by turning it counterclockwise with a set of tweezers.

Remove the brass washer from the base of the antenna slot by turning it counterclockwise with a set of tweezers.

Remove the two 15mm T8 Torx screws from the base of the battery cavity.

Using a plastic opening tool, pry in between the plastic case and metal circuit board to remove the board.

Peel off the keypad by hand.