필요한 것
-
-
Select "Quick Setup" from the home menu.
-
Select the "Pre-heat" option PLA
-
-
-
-
Press the ear of the extruder with one hand and insert the filament into the hole as shown in the pictures.
-
-
-
Push the filament through the PTFE tube until it exits through the nozzle to make sure it has been inserted all the way.
-
거의 끝나갑니다!
Ready! Your Filament is inserted!
결론
Ready! Your Filament is inserted!
다음 번역가들에게 특별히 감사 드립니다:
pt en
100%
irlanda님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›