소개

This guide will teach the reader to install a new Battery Circuit Connector into the battery case. This may need to be done if the batteries are not delivering electricity into the camera.

부품

부품은 필요하지 않습니다.

  1. Flip the camera over so the bottom is facing you. Flip the camera over so the bottom is facing you.
    • Flip the camera over so the bottom is facing you.

  2. Open the cover on the bottom by sliding it in the direction of the arrow. Open the cover on the bottom by sliding it in the direction of the arrow.
    • Open the cover on the bottom by sliding it in the direction of the arrow.

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Remove the batteries by pulling up on the top with your fingers.
    • Remove the batteries by pulling up on the top with your fingers.

  5. Remove the three screws from the circuit connector.
    • Remove the three screws from the circuit connector.

  6. Remove the connector from the battery holder door.
    • Remove the connector from the battery holder door.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Nick Oleskowicz

회원 가입일: 2012년 04월 03일

263 평판

안내서 3개 작성하였습니다

Cal Poly, Team 15-13, Forte Spring 2012 Cal Poly, Team 15-13, Forte Spring 2012 회원

CPSU-FORTE-S12S15G13

5 회원들

안내서 5개 작성하였습니다

조회 통계:

지난 24시간: 2

지난 7일: 4

지난 30일: 7

전체 시간: 1,333