Kodak Signet 35 Shutter Spring Replacement - iFixit 수리 안내서

소개

If the shutter on your Kodak Signet 35 isn't working properly, then the shutter spring may need to be cleaned or replaced. This guide will show you how. Please make sure you have all the necessary tools, as well as a clean and stable surface on which to work, before you start these steps.

필요한 것

1 단계 Shutter Spring

Kodak Signet 35 Shutter Spring Replacement, Shutter Spring: 1 단계, 이미지 1/3

Kodak Signet 35 Shutter Spring Replacement, Shutter Spring: 1 단계, 이미지 2/3

Kodak Signet 35 Shutter Spring Replacement, Shutter Spring: 1 단계, 이미지 3/3

While the camera is lying on its back, unscrew the front lens assembly and remove the lens and the faceplate. Then lift off the speed setting.

2 단계

Kodak Signet 35 Shutter Spring Replacement: 2 단계, 이미지 1/2

Kodak Signet 35 Shutter Spring Replacement: 2 단계, 이미지 2/2

Remove the lever from the stopper by pushing it back and then upwards.

3 단계

Kodak Signet 35 Shutter Spring Replacement: 3 단계, 이미지 1/2

Kodak Signet 35 Shutter Spring Replacement: 3 단계, 이미지 2/2

Remove the stopper by lifting it upwards with the tweezers.

4 단계

Kodak Signet 35 Shutter Spring Replacement: 4 단계, 이미지 1/3

Kodak Signet 35 Shutter Spring Replacement: 4 단계, 이미지 2/3

Kodak Signet 35 Shutter Spring Replacement: 4 단계, 이미지 3/3

Using tweezers, unhitch the spring from the base and remove it by lifting upwards.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Mellyssa Greene

회원 가입일: 09/07/16

134 평판

안내서 1개 작성함

배지 +3개 더

팀

USF Tampa, Team 6-3, Remmell Fall 2016 USF Tampa, Team 6-3, Remmell Fall 2016 회원

USFT-REMMELL-F16S6G3

4 회원들

안내서 9개 작성하였습니다

댓글 2개

What kind of spring can be used to replace it or how would one revitalize the old spring?

Ben Le - 2018년 6월 8일 답글

What does “front lens assembly” look like? what parts do I have to unscrew?

Shawn Reynolds - 2022년 6월 22일 답글

조회 통계:

24 시간 전: 3

7일 전: 13

30일 전: 39

전체 시간: 2,221