주요 콘텐츠로 건너뛰기

LG 1010 Keypad Replacement

필요한 것

  1. LG 1010 Keypad Replacement, Battery: 1 단계, 이미지 1/1
    • Turn off the cell phone and place face down on a flat surface.

  2. LG 1010 Keypad Replacement: 2 단계, 이미지 1/2 LG 1010 Keypad Replacement: 2 단계, 이미지 2/2
    • While sliding the gray tab up, lift battery up and away from the cell phone.

  3. LG 1010 Keypad Replacement: 3 단계, 이미지 1/3 LG 1010 Keypad Replacement: 3 단계, 이미지 2/3 LG 1010 Keypad Replacement: 3 단계, 이미지 3/3
    • Remove battery and set aside.

  4. LG 1010 Keypad Replacement, Antenna: 4 단계, 이미지 1/1
    • While holding cell phone firmly in one hand, unscrew and remove the antenna with the other hand.

  5. LG 1010 Keypad Replacement: 5 단계, 이미지 1/2 LG 1010 Keypad Replacement: 5 단계, 이미지 2/2
    • Pull the antenna housing (black tube) towards bottom of phone and remove.

  6. LG 1010 Keypad Replacement, Back Cover: 6 단계, 이미지 1/2 LG 1010 Keypad Replacement, Back Cover: 6 단계, 이미지 2/2
    • Unscrew the four screws on the back case using a T6 Torx Screwdriver.

  7. LG 1010 Keypad Replacement: 7 단계, 이미지 1/2 LG 1010 Keypad Replacement: 7 단계, 이미지 2/2
    • Pull the back cover straight off the phone using your thumb and forefinger.

  8. LG 1010 Keypad Replacement, Keypad: 8 단계, 이미지 1/1
    • Pry off circuit board with a flathead screwdriver.

  9. LG 1010 Keypad Replacement: 9 단계, 이미지 1/1
    • Pull out flexible keypad.

결론

Install new keypad and reassemble following these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Nicholas Schmidt

회원 가입일: 10/09/10

97 평판

안내서 7개 작성하였습니다

Cal Poly, Team 3-25, Regan Fall 2010 Cal Poly, Team 3-25, Regan Fall 2010 회원

CPSU-REGAN-F10S3G25

4 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 913