1. Step 1. Remove: Remove the indicated screws from the camera.
    • Step 1. Remove: Remove the indicated screws from the camera.

    댓글 쓰기

  2. Step 2. Remove all the screws: Keep all the screws and disconnect the cables carefully.
    • Step 2. Remove all the screws: Keep all the screws and disconnect the cables carefully.

    • Step 3. Lift: After removing all the cables, lift up and flip over the PCB.

    댓글 쓰기

    • Step 4. Remove: Remove marked screws on top and around the lent.

    • **Remove all the parts, be aware that there are a lot of screws and keep count them a long the way of the dissambley **

    댓글 쓰기

    • Step 5. Carefully remove as much of the glue as possible before proceeding to the next step.

    • Step 6. Remove the marked focus spacers.

    • Place a bead of silicone adhesive on each side of the ir filter to fix it in position and allow to cure.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Marina Bayardo

회원 가입일: 2015년 10월 22일

209 평판

안내서 2개 작성하였습니다

University of Memphis, Team 3-2, Kim Fall 2015 University of Memphis, Team 3-2, Kim Fall 2015 회원

UM-KIM-F15S3G2

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 7

전체 시간: 323