주요 콘텐츠로 건너뛰기

소개

After removing the top cover you will be able to replace the mouse buttons.

부품

지정된 부품이 없습니다.

  1. Hold the mouse so that the bottom is facing up.
    • Hold the mouse so that the bottom is facing up.

    • Locate the #1 screw towards the bottom half of the mouse.

    • Take the 4.76 mm Phillips screwdriver and unscrew the #1 screw.

  2. Place the mouse so that the bottom is resting against a hard surface . Gently lift the top cover of the mouse and remove.
    • Place the mouse so that the bottom is resting against a hard surface .

    • Gently lift the top cover of the mouse and remove.

  3. PC 노트북 배터리

    품질을 보증하는 모든 최고의 PC 브랜드용 배터리

    지금 장보기

    PC 노트북 배터리

    품질을 보증하는 모든 최고의 PC 브랜드용 배터리

    지금 장보기
  4. Locate the two tabs that are protruding from the button assembly. Be careful not to break either of the two tabs by squeezing too hard.
    • Locate the two tabs that are protruding from the button assembly.

    • Be careful not to break either of the two tabs by squeezing too hard.

    • Now pinch the tabs together to free the buttons.

  5. Free the button assembly from the top cover by bringing the button section down. Then sliding the button assembly out from the top cover through the opening.
    • Free the button assembly from the top cover by bringing the button section down.

    • Then sliding the button assembly out from the top cover through the opening.

    • When fully parted the top cover and the button assembly should look like this.

결론

To reassemble your device, follow these instructions in reverse order.

Maximilian Betkowski

회원 가입일: 2013년 01월 11일

172 평판

안내서 4개 작성하였습니다

Cal Poly, Team 5-14, Forte Winter 2013 Cal Poly, Team 5-14, Forte Winter 2013 회원

CPSU-FORTE-W13S5G14

5 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 7

전체 시간: 1,585