주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

이 안내서를 사용하여 고장난 디스플레이 어셈블리를 교체하세요.

  1. 다음 나사 열 개를 풀어주세요:
    • 다음 나사 열 개를 풀어주세요:

    • 14.4mm Phillips/십자 #00 나사 세 개

    • 3.5mm Phillips/십자 #00 나사 세 개

    • 3.5mm shouldered Phillips/어깨 십자 #00 나사 네 개

    • 작은 나사들을 교체할 때 약간 굽은 케이스에 수직으로 맞추세요 (똑바로 내려 가지 않습니다).

    Does void the warranty?

    jfondeur - 답글

    No, it does not void the warranty. More specifically: http://eshop.macsales.com/Search/display...

    oakdragon12 - 답글

    How much weight can I save by removing the optical drive?

    gunes314 - 답글

    You can save a lot of weight if lets say your installing a solid state drive or putting in a second hard drive but if you know that you use the CD/DVD disc drive a lot then you might just want to leave the drive alone.

    Marshall WahlstromHelgren -

    Also wondering how much weight I'd save by just removing. My drive is broken for ages, but I have not needed it in ages. The HD was already replaced by a cheap SSD (second best thing after upgrading to 8GB), so I'd appreciate losing some weight. I mean, the computer. Although I could lose some too... erm... well, anyway, I guess the lack of the DVD would not interfere with anything, right? Opinions?

    Carlos Duarte do Nascimento - 답글

    Apple has meticulously balanced the MacBook's weight from left to right, and removing the optical drive may off-balance the Mac.

    Seji the veggie -

    What so you think that a removing the optical drive which weighs less than a AA battery will unbalance a MBP making it unusable? LOL!

    Unless you use the MBP on a high wire (an even then I have my doubts) you'd never notice the weight difference.

    pmhparis -

    The issue is not one of weight but an issue with the systems cooling and an opening which objects could enter. For a few grams of weight I don’t think its worth it! A better solution would be to swap out the heaver HD for a much lighter SSD, and getting all of the performance benefits of the faster drive as well!

    While you might not think it the optical drive also acts as a stiffener so there is less twist in the case. This is because of the size of the hole for the DVD/CD’s so taking it out weakens the case design.

    Dan -

    I'm thinking you'd probably be OK losing the DVD drive without a problem. Just make sure the optical drive cable is secured or you might hear it rattling in there from time-to-time.

    John Adam Wickliffe - 답글

    Hey guys,

    this website is amazing. I read it to guide me on fixing my mac book pro, but on the video, the girl gives a wrong information.. She says that is not possible replace just the keyboard... But I managed to replace only my keyboard. It is boring because I have to remove approximately 70 screws but it is possible. Thanks a lot! You guys helped me save about US$300 thats because in Brazil some technicians would charge me with that amount!

    I posted some pictures on your facebook page..

    renatumb - 답글

    Tip: Use one of those weekday pill holders to have a cheep way to store screws you remove and each day of the week can be for different sizes or parts. It has been handy to have (much less expensive than the magnetic mat.

    Robert Wacker - 답글

    Great tutorial. I found that using a Phillips #0 in lieu of the #00 worked much better.

    kschmesk - 답글

    Totally agree!! I used the #00 screwhead for 7 out of the 10, but for the remaining tricky ones I used the #0 screwhead and it helped me out. I was so worried I would strip the tiny screw, but this comment saved me!

    Juliana Mak -

    I tried the PH #00 for the 10 screws that hold the bottom case and it's too big, instead PH #000 works perfectly. Are you sure this screws are #00?

    Alex - 답글

    The likely problem with your wifi is not the card but the antenna leads that go into the plastic clutch

    . Ifixit don't have a guide to change this as it it includes the isight camera so the screen has to be disassembled which is fairly hard

    I got round it by using the camera cable from the old set and cutting off the new one

    brian whittle - 답글

    Hello MacWorld,

    Just want to say that this site is a great resource for repairing or upgrading your Mac. I had a bad SATA cable in my MacBook Pro and after ordering a new one from the "IFIXIT" site I received the cable within two days, replaced it and was up and running again in no time. Thanks IFIXIT for you help!

    wer 10/5/15

    tayseer999 - 답글

    I have found that my MacBook Pro 13 Late 2011 has five shouldered screws and not four. I am not sure exactly where it goes but I have put it in the top left corner of the picture as it is the odd one out.

    ForumHermit - 답글

    Hello, where can I buy the screws I need in case I lose one of them?

    taylornya - 답글

    on my device the #00 screwdriver was a bit too small. a #0 was the perfect one

    Maximilian Klotz - 답글

    I found with mine that the shouldered and un-shouldered screws were reversed (the three un-shouldered screws going where the orange colour indicates). Also, I found that the front four screws went in at an angle.

    gilded yak - 답글

    Are you sure the short screws are different? The set sold here just says “Seven 3 mm Phillips #00 screws.”

    Jack - 답글

    I have the same question. What is the difference between shouldered and not? So hard to see any difference…

    Michael Wilkens -

    I’ll second that. I could never find them being different.

    otetz -

    Same here… I could not notice hte difference. Anyone at iFix would like to comment?

    LDS -

    I have one stripped screw... How opening without drill it?! Any suggestions please?

    rodrigosady - 답글

    I also stripped a couple screws. I wasn’t able to open it up without drilling. After drilling the heads and removing the cover it was easy to hacksaw the tip and unscrew with a standard driver.

    Michael Wilkens -

    I used 3 eggcups to hold the screws ;>) They are very fiddly and easy to drop on floor so keep the MacBook away from the edge of the surface you are using to avoid accidentally dropping a screw off the edge of a table, etc.

    Stephen Smith - 답글

    A screw does not come out, how can I get it out? Many thanks in advance for your help

    Wilder Torres - 답글

    Since you’ll be removing many screws it’s best to plan ahead. I found it especially helpful to have a small plastic tray with about a dozen separate compartments to hold screws. As I removed screws I kept them in one compartment for each item removed. For example: The lower case removal involves the removal of ten screws. I kept them all in the first tray compartment and set the lid aside. Also, I put a post-it note identifying this compartment as “Lower case” and noted that the top right-most screws were the long ones. I continued with this methodology as a removed the next item, and the next, etc. Disassembly notes included for each compartment. This helped SIGNIFICANTLY as I was able to reassemble the Macbook easily by simply going from one compartment to the next (in reverse order). This guide is rated “Difficult” which it really isn’t when you plan ahead in this way. It saves time in the long run.

    airshack - 답글

    when putting the macbook pro back together, the middle screw on the right side (if the computer is upside down and you have the hinge furthest away from you) requires a bracket that was not included with my new upper case. i had to remove it from my old case and transfer it over - if you don’t do this, that screw will have nothing to attach to.

    this was one of the many additional parts i needed to transfer from my old case to the new one that aren’t mentioned in this guide…i’m adding comments on each step to try to help others…i wish i had thought to take pictures.

    Matt - 답글

    It seems to me the yellow and orange screws are the same

    Luca Giancarli - 답글

    If you look closely, the four front screws (with the yellow circles) have a short unthreaded section under the head. The orange keyed screws are threaded all the way up.

    Raymond Ives -

    The screws used on all Retina models, as well as about everything Apple has made since the iPhone 4, uses “PENTALOBULAR” not Phillips screws. These look like a TORX driver, but it has 5 concave sides. I believe the size you want is a P4 or T4. (1.2mm).

    Don Cely - 답글

    Two screw types:

    ______________________________

    Shouldered Unshouldered

    xxxxxxx……….xxxxxxx

    ..xxxxx……..….…….x…….

    …..x……..…...……….x…….

    …..x…………....……..x…….

    ______________________________

    El Crashitan - 답글

    If you are following this guide to upgrade to a better drive and want to keep your system and data intact I highly recommend first following the guide to Clone an Existing Drive using the recommended free SuperDuper!. That process was a breeze and gives you confidence that the new drive will come up looking exactly the way it did when you started.

    Patrick Langvardt - 답글

    My top tip - make sure you buy good quality Phillips screwdrivers and a magnetic holder. Cheap screwdrivers won’t get the screws undone safely. Without a magnetic holder you have no chance of getting the tiny crews in and out safely.

    jeremyyoung - 답글

    I did this last weekend, and definitely, a Phillips #000 screwdriver is required (not a Phillips #00!)

    Javier Campos Delgado - 답글

    WIll this card be good with MacBookPro 17 inch 2011

    Zafar Ali - 답글

    I just followed this guide and it really helped me install a replacement cable and a new Samsung 860 EVO 500gb SSD in my aging MacBook Pro 13 A1278 MID 2012. It’s performing like a new machine now! The guide worked fine, but I’m curious why this HD cable costs €45 on Ifixit’s webshop, and only €13 on Amazon.de (I live in Europe)? The Amazon purchase also included two screwdrivers and a spudger.

    Jeff Baker - 답글

    I found out that one way to reduce the chance to loose screws is to leave them in their holes of the lower case right after unscrewing them. In fact, you can put the lower case back in place with all but one screws in place. The only one that I ever needed to put apart was the long one at the top right in the picture (the one that goes close to the display data cable underneath the lower case). Hope this help others! and you stop wondering about shouldered versus not shouldered short (3.5mm) ones :-)

    LDS - 답글

    For a MBP 2011, I’m not able to unscrew one of the 14.4 mm in the lower back. Can I know how can I get that done?. Thank you..

    Rajesh Rajasekharan - 답글

  2. MacBook 본체 벤트 근처 하단 케이스를 손가락으로  들어올려 분리하세요. 하단 케이스를 분리하세요.
    • MacBook 본체 벤트 근처 하단 케이스를 손가락으로 들어올려 분리하세요.

    • 하단 케이스를 분리하세요.

    If the black vent window that is attached to the back cover becomes loose what kind of glue should be used to attach it again, thermal paste or super glue?

    Thanks for your help.

    Mikell - 답글

    bonjour cette truc ça marche au mac Brook pro Retina ou pas?

    Shi Feng - 답글

    Bonjour, alors cela va dépendre du modèle de MacBook Pro Retina concerné. Par exemple, si vous avez un 13 pouces, allez consulter cette page MacBook Pro 13" Retina Display Repair et sélectionnez-y votre modèle. Les Retina 15 pouces se trouvent ici MacBook Pro 15" Retina Display Repair. Sinon cet outil https://fr.ifixit.com/info/ID-your-Mac (pour l’instant seulement disponible en anglais) vous aide à identifier quel modèle vous avez et vous redirige vers la page de votre appareil, où vous trouverez le tutoriel correspondant à votre Retina. Bonne réparation !

    Claire Rapp -

    Merhaba, trackpad değişimi ve ayarlaması için tornavidaya ihtiyacım var, bu konuda yardımcı olabilir misiniz acaba? Ne tür bir tornavidaya ihtiyacım var ve nereden bulabilirim acaba?

    Volkan Ogul - 답글

  3. Spudger/스퍼저 가장자리를 사용하여 배터리 커넥터를 로직 보드 소켓에서 위로 들어 올리세요. 커넥터의 짧은 양쪽을 위로 들어 올려 소켓에서 "걸어 나오도록" 하세요. 커넥터 모서리를 조심하세요. 쉽게 끊어질 수 있습니다.
    • Spudger/스퍼저 가장자리를 사용하여 배터리 커넥터를 로직 보드 소켓에서 위로 들어 올리세요.

    • 커넥터의 짧은 양쪽을 위로 들어 올려 소켓에서 "걸어 나오도록" 하세요. 커넥터 모서리를 조심하세요. 쉽게 끊어질 수 있습니다.

    Is this step of removing the battery connector required?

    manodh - 답글

    yes - as with disassembly of any electronic component you have to remove any power source. You don't want to accidentally turn the Mac on

    khull -

    Sooo the track pad is under the battery...you kind of have to remove it to get to the track pad.

    stiknrudder -

    This step is not really required. Apple does not recommend it.

    Steven Layton - 답글

    My Battery does not get recognized after i disconnected it, screw this site!

    Diego Hernandes -

    Did you properly ground yourself to the case before putting the spudger to the connector/logic board? Did you use a spudger or something else that is non conductive...or did you use a flat blade metal screw driver instead and compound your error by not grounding yourself before touching the logic board? All kinds of variables here but the bottom line is iFixit provided you a guide to fix your computer. Lots of others have followed this guide without trouble. Your battery issues are not their fault. They did say this guide was moderate difficulty...maybe it's just a little beyond your skill level. We should all know our limits!

    stiknrudder -

    Rather than be careful of the corners of the connector i would say don't use the spudger anywhere near the corners. While the corner looks like the obvious place to begin to pry it up from, it will break. Levering from the sides as the instructions suggest works well.

    ausmkv - 답글

    wonder why apple does not recommend it?!

    Peter - 답글

    I would recommend it, one careless short and the whole board is dead......

    John - 답글

    simply remove the battery rather than disconnecting the cable

    toiu - 답글

    What do you mean by "remove the battery"?

    Anrothan -

    Don't know what the deal is with the battery, but this IS a necessary step to keep from frying the logic Board if you accidentally touch something and short it out. I did this step every time during my troubleshooting and The battery was ALWAYS recognized by the system the next time I turned the MBP on. So be safe and don't fry your logic board in the process...

    fasthans - 답글

    Prying the battery connector off does not take much force. I did exactly what the guide suggested (walked it off back and forth) with the spudger without any problems. Just be very gentle, much like with anything inside laptops, they are very fragile and need to be worked with carefully. A+ instructions, battery replacement was a success.

    aekinaka - 답글

    Installed/upgraded 4gb RAM to the system maximum 16gb and installed a 500 gb SSD today....DID NOT disconnect the battery cable....no issues at all when I powered back up. Then did a clean install of OSX Yosemite....next I used a time machine backup to put all my stuff back on the new HD. From start to finish it took about 4 hours. Macbook boots up right at 16 seconds now.

    MacProUser - 답글

    Easiest to use two spudgers, one on each short end, I found.

    Simon Mundy - 답글

    I took off th Airport /Bluetooth connectors but the number J3 connector is broken and so where can i buy J3 connecter for the Airport/bluetooth board

    Zeerachen - 답글

    Its a lot easier and safer (corner wise) to pry it using the flat side of the black spudger directly in front of the connector (don't go/use the corners) very easily you will be able to pry it further by inserting the spudger into a better and thicker plastic section of the connector

    Ed Oliver - 답글

    DON'T remove the Battery Cable, you risk the battery NOT being recognised when you start the Mac up again, or breaking it!! More to the point, APPLE DOES NOT RECOMMEND THIS, so don't do it! I Installed 2x 8GB ( 16Gb total) of Crucial Mac RAM at 1333Mhz for my Late 2011 MacBook Pro, and it works beautifully, fully recognised and working well. I followed these instructions, but as Apple didnt recommend disconnecting the battery, I skipped this step, and as well as taking less time, nothing was damaged or broken, and everything works perfectly!!! Just make sure that you DISCHARGE ALL STATIC ELECTRICITY FROM YOUR HANDS, by touching a metal surface in the Mac. Apple recommends the edge of the Optical Disk Drive ( Big silver thing ) before touching any parts. Also, Take care removing the RAM out of its packet, DO NOT touch the Gold connectors, and hold the RAM by the edges. Finally, be PATIENT, GENTLE and it should all go perfectly. I managed it first time, with no technical ability, so follow my advice. Good luck!

    Bradley Marks - 답글

    Followed the tuto Step by step. Disconnected the battery (quite easily).

    No problem when I lit the Mac on again. Battery's here, date's right.

    nichoferr - 답글

    Switch off your Mac and continue without disconnecting the battery. Don't know how it will switch on by itself.

    Mfernandez - 답글

    This comment made me think that disconnecting the battery was no point at all, because really - how would the computer be able to switch on by it self. So... I had my mac flipped around and was fiddling with the last part of the guide when I all of a sudden hear the start up sound! Don't know how and why it did. I turned it around with it guts open and guts hanging out. Screen was on. I forced it to shut down by keeping the power button down. Turned it back and first thing removed the battery cord.

    Luckily the computer started up just like normal. But hearing that sound was just too scary.

    BTW I had been cautious to de static myself multiple times.

    wassberg -

    Definitely do this step. It's an easy disconnect anyway and also easy to reconnect later.

    Stephen Smith - 답글

    I removed the battery cable for the repair. When I plugged in the MagSafe adapter after the repair, the Mac turned on automatically without pressing the power button and I was a bit worried, but after a restart everything worked fine again. I did have to reset date and time in Preferences. The battery was recognized OK.

    Raymond Rinaldi - 답글

    Okey, I skipped this battery disconnection part. Did not do anything like this before in my life, changing the cable was super easy!

    Marijke de Vries - 답글

    The official Apple guide to replacing the RAM says nothing about disconnecting the battery but it does recommend touching metal inside to discharge static. https://support.apple.com/en-us/HT201165

    B T - 답글

    I always do this when working on MacBooks (over ten years) and it never caused an issue. Don’t worry about this step as removal of the battery connector is simple. This particular connector is pretty much goof-proof as it won’t break. I’m fairly aggressive and just pop it off whenever I’m working on the Macbook Pro.

    airshack - 답글

    Hello!

    Do I really need to use a spudger tool? Can’t I just use like two plectrums for guitar? xD

    Myzcio - 답글

    I have a late 2011 MacBook Pro 13in and did not disconnect the power from the battery. I upgraded from 4gb to 16gb and worked perfectly. Just make sure to power it down and be gentle. It was super easy and quick, and I feel a significant boost in performance. Cant wait to install my 1TB SSD Samsung 860 next!

    Rock Hash - 답글

    Be patient on disconnecting this one. It worked for me step by step, little by little.

    Phil Wagner - 답글

    u can use 16GB DDR3 @ 1600mhz. intel says 16 @ 1333, and apple 8.

    apple will solder even the folders to the background for to sell you the “open” or “move to the trash” command. if the battery is not removable, its not a casuality…. u can be sure

    Oscar Sanchez - 답글

    Would draining the battery (by using the machine until it runs out of power) do the trick for this? Seems it would be less risky than potentially damaging the connector/cable during disconnection for example.

    moshimoshi - 답글

    Cannot install any os on new ssd ? Mac is reading it.. please help

    robertbruen - 답글

  4. 배터리 케이블을 로직 보드 소켓에서 약간 구부려 멀리하여 작업 도중 실수로 연결하지 않도록 하세요.
    • 배터리 케이블을 로직 보드 소켓에서 약간 구부려 멀리하여 작업 도중 실수로 연결하지 않도록 하세요.

    What are the changes of it broke when i bend it?, after i disconect it does not work anymore

    Diego Hernandes - 답글

    The guide worked perfectly, as it has in the past (our family has three Mid-2012 Macbook Pros that have been separately upgraded with RAM and SSD).

    The PH00 screwdriver fit perfectly.

    One note on getting the screws to seat easily and thread perfectly...always turn them gently a couple turns to the left (CCW or Anti-Clockwise) until you hear a small click. That's where the threads will grab. Works with any screw, but when threads are fine, this will help ensure that the screw is at the correct angle and will grab and seat perfectly.

    Great guides. Thanks!

    timgunkel - 답글

    Got RAM in but only one slot is working and now I can't remove! The RAM won't pop up like before and tabs don't seem to do anything. Please advise.

    Sal Ergrapes - 답글

    I put some tape between the connector and socket while working on the drive.

    Stephen Smith - 답글

    That's a good tip

    Anrothan -

    Followed the advice and right as I was installing the replacement fan , the socket broke right off the motherboard.

    Ian Thal - 답글

    One other note: The screw heads fit flush with the curvature of the case -- which means that they aren't exactly horizontal. In other words, they aren't perpendicular to the table that the computer is resting on. Don't try to force them straight in vertically, because you'll risk cross-threading them. (nearly ruined one screw hole myself!)

    lelandjordon - 답글

    does the battery connection need to be removed? I only ask as other videos etc have not shown this step.

    Darren Rose - 답글

    Très bonnes explications. Concernant le débranchement de la batterie, faute de “smudger”, on peut le faire tout doucement avec le bout des ongles (s’ils ne sont pas coupés trop à ras, LOL), et surtout ne pas tenter de le faire d’un coup: il faut y aller tiers de mm par tiers de mm. Le retrait des anciennes mémoires n’est pas facile non plus, car on a très peu de place pour manœuvrer, là encore il faut y aller petit à petit, avec les plus grandes précautions! La barrette située le plus profond doit être soulevée assez fortement dans sa partie libre pour pouvoir être extraite de son étroite cuvette et ce n’est pas simple. Le remontage est nettement plus simple que le démontage. Il faut surtout faire très attention à ne pas confondre les petites vis à épaulement avec celles qui n’en ont pas. Je conseille, avant de remettre le couvercle de fond du Mac, de faire un essai de redémarrage pendant une minute ou deux pour bien voir si tout est OK.

    Lionel Colbere - 답글

  5. Spudger/스퍼저의 평평한 끝을 사용하여 AirPort/Bluetooth 리본 케이블 커넥터를 로직 보드 소켓에서 들어 올리세요.
    • Spudger/스퍼저의 평평한 끝을 사용하여 AirPort/Bluetooth 리본 케이블 커넥터를 로직 보드 소켓에서 들어 올리세요.

    N.B! Thank you very much all you here on iFixit! Some IMPORTANT notes. Be very careful BEFORE prying the connectors up and down. They are very fragile and the picture could actually be seen as showing a bending loading in their weakest direction, AROUND its slender axis. The connector is slender and inserted on the logic board, so the gentle "walking" up and down should be done ALONG their slender direction and WITHOUT touching the adjacent connectors. If bending is done around its axis the soldering comes apart and the cable is done and gone. Just happened. These flat cables are one of the weakest design spots in my experience. They are a major time, money and geist consuming reason for malfunction like Wi-Fi connection problems, HDD, SSD not found internally but externally from USB issues et al being found on different forums. Thanks again and again.

    Greg - 답글

  6. 로직 보드 소켓에서 카메라 케이블을 조심히 당기세요.
    • 로직 보드 소켓에서 카메라 케이블을 조심히 당기세요.

    • 케이블을 로직 보드 면과 평행하게 당기세요. 케이블을 위로 당기면 로직 보드 또는 케이블 자체를 손상할 수 있습니다.

    I ripped the camera cable where can I buy a new one

    fadybitar2000 - 답글

    Be very careful at step 6!

    I had the same problem with the model "Late 2011" and I doubt to step 6 because the camera cabel connector was plugged very tight in the board-socket. So I cannot believe it is so easy to unplug the connector.

    I bought a new camera cable on eBay.

    Tomasz Borkowski - 답글

    Be extremely careful on step 6 with late 2011 model unibody macbooks! The cable is connected very tightly to the board and has a great chance of ripping if you just pull the cable.

    Tim Rauls - 답글

    I ripped the camrea cable socket on the logic board.

    Pedram Fattahi - 답글

    Walk the cable out with a spudger!!! The Retina 2012 guide has this and this was so easy using the tool.

    Robert Le Monds - 답글

    do you know the color order

    Mehmet Düzoylum - 답글

    I didn’t even bother pulling out this camera cable, just moved it aside and kept it out of the way.

    Shazz Mahfudz - 답글

    Red green white yellow blue orange.

    Fatih S - 답글

  7. 서브우퍼와 AirPort/Bluetooth 브래킷에 고정하는 접착제에서 카메라 케이블을 벗길 때 AirPort/Bluetooth 리본 케이블을 조심히 치우세요. AirPort/Bluetooth 브래킷 고정장치 아래에서 카메라 케이블을 빼세요.
    • 서브우퍼와 AirPort/Bluetooth 브래킷에 고정하는 접착제에서 카메라 케이블을 벗길 때 AirPort/Bluetooth 리본 케이블을 조심히 치우세요.

    • AirPort/Bluetooth 브래킷 고정장치 아래에서 카메라 케이블을 빼세요.

    What adhesive is suitable for reattaching the foam tape and wires that were removed from their normal routing?

    David Warshowsky - 답글

    I want to know that too!

    Alberto Harres Rocha -

    Take a few phone close-ups of this corner of your system prior to disassembly. Extra photos really help during reassembly.

    airshack - 답글

    I didn’t use any extra adhesive here during reassembly. The camera cable fits snuggly between the subwoofer module and the DVD drive. Apple’s adhesive here is really just overkill.

    airshack - 답글

  8. Spudger/스퍼저의 뾰족한 끝을 사용하여 로직 보드에서 가장 가까운 안테나 커넥터를 AirPort/Bluetooth 보드 소켓에서 들어 올리세요. AirPort/Bluetooth 브래킷 고정장치 아래에서 안테나 케이블을 빼세요.
    • Spudger/스퍼저의 뾰족한 끝을 사용하여 로직 보드에서 가장 가까운 안테나 커넥터를 AirPort/Bluetooth 보드 소켓에서 들어 올리세요.

    • AirPort/Bluetooth 브래킷 고정장치 아래에서 안테나 케이블을 빼세요.

    Can someone explain me what this "antenna cable" is for? I changed my Topcase and this antenna did break during the procedure =(.

    The problem is i can't find this cable anywhere to buy and i don't even know his function. WIFI and Bluetooth are working just fine.

    Can someone please help me?

    kadiroeztel - 답글

    Same here, I was removing the display and once i put it back on the three little antenna cables fall off. Any idea how to replace it or find it?

    Hector Torres -

    Those are the WiFi antennae..

    auadix -

    When I was repairing the hinge of my laptop two of the antenna cable connectors came off the ends of the antenna wires. Can someone confirm what these are called and the size so I can source replacements? I believe they may be called ’Micro RF Coax Connector’ but I am not sure what size I need. For the record the wifi is actually still working but may be a bit slower than normal. Thanks for your help.

    Alan Holt - 답글

  9. 지난 단계에서 설명한 방법을 사용하여 나머지 안테나 커넥터 세 개를 분리하세요. AirPort/Bluetooth 브래킷의 슬롯에서 케이블을 분리하십시오.
    • 지난 단계에서 설명한 방법을 사용하여 나머지 안테나 커넥터 세 개를 분리하세요.

    • AirPort/Bluetooth 브래킷의 슬롯에서 케이블을 분리하십시오.

    What are these? Like in order? I broke the middle one and am trying to find a replacement. The mac actually functions quite normally, currently using it to type this ahaha, anyways, only difference I've noticed is that the speaker sounds a bit weird/off. Internet is fine, display is fine, everything is fine at the moment besides the speaker. And in case you're wondering how exactly broken it is, its not connected to begin with since it ripped ahahaa...

    Lupita Felix - 답글

    Same issue here, with the first from the top. I wonder if i will have some kind of issue in future.

    Davide Savà -

    I found re-attaching these antennae connectors the trickiest bit by far as they appear very delicate and seating them correctly was fiddly. In the end lighting them from the side with a small torch helped to check their position before gently pushing them down. The first one made a clicking sound as it connected, the other two went on silently. MBP wifi working perfectly now. I’m fairly sure that was at least £100 of labour had I taken it in for repair so thanks ifixit for saving me money and for the warm glow of accomplishment!

    Andrew - 답글

    Where can i buy that very same set of antennas, I’ve broken what seems to be the bluetooth one, even tough my Mac was already used when i bought it,(and that cable did not seem to came from the same spot has the other 3 “small ones”) the screen wobbled a Little bit so there i tried to fix it myself, now i have no wobble, but no Bluetooth though :(

    cesar031086 - 답글

  10. 다음 나사 다섯 개를 풀어주세요:
    • 다음 나사 다섯 개를 풀어주세요:

    • 10.3mm Phillips/십자 나사 두 개

    • 3.1mm Phillips/십자 나사 두 개

    • 5mm Phillips/십자 나사 한 개

    The two screws marked in orange are not present in my early 2011 macbook pro

    bhavishya tyagi - 답글

    Should be worth noting that the black tape/wire grommet on the right red screw is flimsy. When overtightened, it can tear.

    Brad Stossel - 답글

    What do the screws in the red circle secure?

    jrm - 답글

    One of the 10.3mm screws is stuck.

    kswytak - 답글

  11. 광학 드라이브 옆 중앙 근처에서 AirPort/Bluetooth 어셈블리와 서브우퍼를 서로가 닿지 않을 때까지 위로 당기세요.
    • 광학 드라이브 옆 중앙 근처에서 AirPort/Bluetooth 어셈블리와 서브우퍼를 서로가 닿지 않을 때까지 위로 당기세요.

  12. 상단 케이스 모서리 가까이에 위치한 연약한 안테나 접촉을 조심하며 AirPort/Bluetooth를 분리하세요.
    • 상단 케이스 모서리 가까이에 위치한 연약한 안테나 접촉을 조심하며 AirPort/Bluetooth를 분리하세요.

    Muss der Antennenkontakt in der Gehäuseecke mit dem Rahmen verlötet sein? Bei mir ist diese Verbindung sehr locker

    martinswieser - 답글

  13. 디스플레이 오른편을 상단 케이스에 고정하는 6mm T8 Torx/톡스 나사 세 개 중 두 개를 풀어주세요.
    • 디스플레이 오른편을 상단 케이스에 고정하는 6mm T8 Torx/톡스 나사 세 개 중 두 개를 풀어주세요.

    • 추후의 단계를 돕기 위해 디스플레이를 상단 케이스에 고정하는 나사 한 개를 남겨놓았습니다.

  14. 디스플레이 데이터 케이블 잠금 장치에 부착되어 있는 플라스틱 당김 탭을 잡고 컴퓨터 DC-In 방향으로 돌리세요. 로직 보드 소켓에서 디스플레이 데이터 케이블을 똑바로 잡아 당기세요. 소켓은 매우 약하므로 디스플레이 데이터 케이블을 들어 올리지 마세요. 케이블을 로직 보드 면과 평행하게 당기세요.
    • 디스플레이 데이터 케이블 잠금 장치에 부착되어 있는 플라스틱 당김 탭을 잡고 컴퓨터 DC-In 방향으로 돌리세요.

    • 로직 보드 소켓에서 디스플레이 데이터 케이블을 똑바로 잡아 당기세요.

    • 소켓은 매우 약하므로 디스플레이 데이터 케이블을 들어 올리지 마세요. 케이블을 로직 보드 면과 평행하게 당기세요.

    This was the hardest part for me. It took me a bit to figure out what parts were the socket and which was the cable and where were they going to separate. What I did was gently twist the pull tab on the cable in a clockwise direction. This allowed me to see a small separation between the socket and cable. At that point I knew what side of the pull tab I had to use a little pressure on, to continue to wiggle the cable free.

    Eric Olson - 답글

    Eric Olson’s comment helped me a lot. I couldn’t figure out how to go about it until I read his comment. Thanks

    oladim - 답글

    I disconnected and when i connect it back the screen doesn turn on

    Erick Corredor - 답글

  15. 다음 나사 두 개를 풀어주세요: 8.6mm Phillips/십자 나사 한 개
    • 다음 나사 두 개를 풀어주세요:

    • 8.6mm Phillips/십자 나사 한 개

    • 5.5mm Phillips/십자 나사 한 개

    • 상단 케이스에서 디스플레이 데이터 케이블 고정 장치를 분리하세요.

    When putting the display case back together, I found it MUCH easier to reinsert the display cable before screwing back in the data cable retainer. It did require me angling my screwdriver to get the rightmost screw in, but it was not too difficult. It certainly made it much easier to reinsert the display cable since I had more freedom to maneuver it back into position. Hope this help others. God Bless!

    eSavior - 답글

  16. MagSafe DC-In 보드 근처  디스플레이 나사를 덮고 있는 폼 테이프를 분리하세요.
    • MagSafe DC-In 보드 근처 디스플레이 나사를 덮고 있는 폼 테이프를 분리하세요.

    How fragile is it really?

    ?

    Albert Einstien - 답글

  17. 디스플레이 왼편을 상단 케이스에 고정하는 6mm T8 Torx/톡스 나사 세 개 중 두 개를 풀어주세요.
    • 디스플레이 왼편을 상단 케이스에 고정하는 6mm T8 Torx/톡스 나사 세 개 중 두 개를 풀어주세요.

    • 추후의 단계를 돕기 위해 디스플레이를 상단 케이스에 고정하는 나사 한 개를 남겨놓았습니다.

  18. 디스플레이가 상단 케이스와 수직이 되도록 MacBook Pro를 여세요.
    • 디스플레이가 상단 케이스와 수직이 되도록 MacBook Pro를 여세요.

    • 열린 MacBook Pro를 그림처럼 테이블에 놓으세요.

    • 디스플레이와 상단 케이스를 왼손으로 잡고 하단 디스플레이 브래킷에서 나머지 T8 Torx/톡스 나사를 풀어주세요.

  19. 디스플레이와 상단 케이스를 왼손으로 함께 잡으세요. 그렇지 않으면 분리한 디스플레이/상단  케이스가 떨어져서 각 부품을 손상할 수 있습니다.
    • 디스플레이와 상단 케이스를 왼손으로 함께 잡으세요. 그렇지 않으면 분리한 디스플레이/상단 케이스가 떨어져서 각 부품을 손상할 수 있습니다.

    • 디스플레이를 상단 케이스에 고정하는 마지막으로 남은 T8 Torx/톡스 나사를 풀어주세요.

  20. 상단 케이스를 오른손으로 잡고 디스플레이 상단쪽으로 약간 돌려 상단 디스플레이 브래킷이 상단 케이스의 가장자리에 걸리지 않도록 하세요. 디스플레이를 약간 돌려 상단 케이스에서 떨어지도록 하세요. 브래킷 또는 케이블이 걸릴 수 있음을 염두하고 디스플레이를 상단 케이스에서 위로 들어 올리세요.
    • 상단 케이스를 오른손으로 잡고 디스플레이 상단쪽으로 약간 돌려 상단 디스플레이 브래킷이 상단 케이스의 가장자리에 걸리지 않도록 하세요.

    • 디스플레이를 약간 돌려 상단 케이스에서 떨어지도록 하세요.

    • 브래킷 또는 케이블이 걸릴 수 있음을 염두하고 디스플레이를 상단 케이스에서 위로 들어 올리세요.

    I used this guide to tighten the hinges; screen was all wobbly because the four screws that hold the screen in place had worked themselves loose. Surprised that getting at the screws required the full removal of the display. One thing that's helpful in putting it all together is in regard to adjusting the position of the hinges; with the screws loose, there is a lot of play in the hinges, and if you just torque them down, the lid won't fit right. I snugged up the screws then put the display back in place on the body & inserted one screw into each side, then loosened the hinge screws to align the screen. That has to happen before replacing the black plastic cover over the bottom edge of the display.

    davidgthornton - 답글

    My Macbook Pro developed a severe wobble in the display so I took it in to the Genius bar to see what could be done. They told me that fixing it would involve replacing the whole display because the problem is due to a piece of plastic inside breaking off. I suspected it just needed to have the hinge screws tightened so I brought my laptop home and gave it a go using this guide. Well, it turns out I was right! The Torx screws joining the hinges to the the display had come loose at both sides. To fix this, I got the hinges lined up straight on the display and tightened them down. To attatch the hinges to the body, I tightened one screw on each side half way and closed the display to line it up with the body. I then proceeded then to tighten all of the Torx screws on the body. Thank you for the great guide, Philip! I love this site!

    gilded yak - 답글

    Have anyone got a didd Saad play disappearing and coming back on

    the issue started when connected with a non apple HDMI cable

    Yasser Onsi - 답글

    Might be a dumb question but can I swap screens from a broken MacBook Pro to the my working one (both same model)

    Manny 3s - 답글

결론

기기를 재조립하려면 이 지침을 역순으로 따르세요.

다른 78명이 해당 안내서를 완성하였습니다.

다음 번역가들에게 특별히 감사 드립니다:

100%

Christian Kim님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›

Phillip Takahashi

회원 가입일: 2011년 08월 22일

81,460 평판

안내서 87개 작성하였습니다

Step 18 and 19 is easier if you place the bottom keyboard down, with the display hanging over the edge of a table. This stabilizes the bottom assembly, making teardown and reassembly easier for one person

pedsurgkb - 답글

Thank you Phillip for providing this Guide. I used it to replace a bad LCD assembly after a water spill damaged it. The last Step 20 is very difficult. I had the worst time trying to separate the two parts after I removed the final Torex screw. It took a while, trying different angles, but I finally got it. Putting in the new one was a trivial exercise...

fasthans - 답글

Hi

I messed up on Step 6 and have broken the cable.

I was wondering how I could fix this?

I went into apple and they said they need to replace the whole display and I don't want to do that since it cost more than I can afford.

Is there a way just to replace the camera cable itself?

If so where can I buy them and how do I replace them?

John Jang - 답글

Phillip, thank you so much for this excellent guide. I have no technical background at all but I found it very easy to use - and it saved me hundreds of dollars on a professional repair job. Keep up the good work!

Simon Mundy - 답글

Hi my name is Daniel, I have a MacBook Pro i5 late 2011 ..... But my display is broken..... I searched in "mercado livre" in my country Brazil and found one display for MacBook Pro early 2010.... My question is ..... Is it possible to assemble it in my computer???

danielsotto - 답글

Hello Phillip,

My magic mouse connects to IMAC and gestures, but not the cursor. I think you recommended putting a soldering iron to it somewhere. Do you have a utube or instructions on this somewhere online? Thank you for your help! Rachael

rachael richardson - 답글

Does the MacBook Pro 13" Unibody Late 2011 have the same ability to unglue the glass? The display is working correctly. I just the damaged the glass.

The 2010 guide at:

MacBook Pro 13" Unibody Mid 2010 Front Display Glass Replacement

I can easily replace the glass if it is the case.

Thoughts?

Thank You

Doug

douglaine - 답글

Thank you so much for going to the effort to explain the steps. It worked out perfect. I work as a Lean Engineer developing Standard Work, which is exactly what you have done. I couldnt have done it any better. Thank you if you ever come to Ireland I owe you a pint :)

Noel Kelly - 답글

I wanted to thank you so very much for your posting.  I performed it slowly and methodically detaching and installing a new screen.  The only difficulty I had was with re-inserting the camera cable - I figured out that I had it upside down because  it wouldn’t go into the connector.  Everything else went smoothly.  When I completed all the steps and turned on my MacBook, a beautiful screen appeared.  Thanks so very much for your hard work in posting this detailed guide!  Jim Bieberich - October 17, 2018

Jim Bieberich - 답글

Perfect instructions and I was able to use a screen from a dead 13” and transplant it perfectly to a unit that had failed hinges. Thanks ifixit!!!

Dave Carnovale - 답글

댓글 쓰기

조회 통계:

24 시간 전: 8

7일 전: 105

30일 전: 443

전체 시간: 87,345