소개
Use this guide to remove the black covers protecting the mouse's white click button pieces.
필요한 것
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 16명이 해당 안내서를 완성하였습니다.
팀
Eastern Washington University, Team S1-G1, Ramos Winter 2018 Eastern Washington University, Team S1-G1, Ramos Winter 2018 회원
EWU-RAMOS-W18S1G1
4 회원들
안내서 15개 작성하였습니다
댓글 6개
you have to buy new ones… i’m more concerned of using pliers to take the switch apart, when ideally you should desolder it and replace it with a proper omron switch (not made in china)
He is only removing the cover, not the whole button. But doing it with pliers is skipping that it has two clips, one at each end and you could damage the board just twisting and pulling
What do you do after step 5? And that copper spring looks wrong. It shouldn’t look like that. The correct positioning is this: https://community.pcgamingwiki.com/galle...
