소개

Dim picture? No display? Discolored output? No problem! Use this guide to replace the burnt light bulb with a new one. To complete this replacement, you will need the following parts ready:

필요한 것

1 단계 Outer Casing

Merch Source Projector Entertainment II Light Bulb Replacement, Outer Casing: 1 단계, 이미지 2개 중 1개

Merch Source Projector Entertainment II Light Bulb Replacement, Outer Casing: 1 단계, 이미지 2개 중 2개

Flip the projector onto its back and unscrew the nine 15mm screws using the Phillips #0 screw driver.

편집

2 단계

Flip the projector right side up and unscrew the two 12mm screws on the light bulb panel located at the rear of the projector with a Phillips #0 screw head.
The bottom right panel screw does not come completely out the panel door.

편집

3 단계

Using your hands, gently pry the top and bottom of the projector casing apart.

편집

4 단계 Remove light bulb assembly from housing unit

Merch Source Projector Entertainment II Light Bulb Replacement, Remove light bulb assembly from housing unit: 4 단계, 이미지 3개 중 1개

Merch Source Projector Entertainment II Light Bulb Replacement, Remove light bulb assembly from housing unit: 4 단계, 이미지 3개 중 2개

Merch Source Projector Entertainment II Light Bulb Replacement, Remove light bulb assembly from housing unit: 4 단계, 이미지 3개 중 3개

Remove the light bulb from its housing unit.
Do not damage the 2 white cables leading into the light bulb panel.

편집

5 단계 Replace light bulb

Merch Source Projector Entertainment II Light Bulb Replacement, Replace light bulb: 5 단계, 이미지 2개 중 1개

Merch Source Projector Entertainment II Light Bulb Replacement, Replace light bulb: 5 단계, 이미지 2개 중 2개

Remove the light bulb from the door panel by gently wiggling it back and forth. Do not twist the light bulb.
The light blub is held into the socket with prongs, and should easily pull straight out.

편집