Accessing the lamp in this television is straightforward and requires minimal disassembly.
Remove the single 18 mm Phillips #1 screw on the lamp access panel.
Pull the lamp access panel off of the back panel of the television by pulling straight back on the left side of the panel near the screw then pulling to the left.
Loosen the two Phillips #2 screws securing the lamp housing to the television until the screws will swivel vertically.
Using the handle, pull the lamp housing straight back out of the television.
해당 안내서 퍼가기
해당 안내서를 사이트/포럼에 작은 위젯으로 포함하려면 크기를 선택하고 아래 코드를 복사하십시오.