Munchkinz Volume Button assembly - iFixit 수리 안내서

소개

If your volume buttons are not working properly follow this guide to replace them.

필요한 것

1 단계 Opening Device

Munchkinz Volume Button assembly, Opening Device: 1 단계, 이미지 1/1

Insert spudger into the USB Micro slot and pry the case apart.
Be careful not to go too deep and bend the prong inside the Micro USB port.

2 단계 Pry Device Apart

Munchkinz Volume Button assembly, Pry Device Apart: 2 단계, 이미지 1/2

Munchkinz Volume Button assembly, Pry Device Apart: 2 단계, 이미지 2/2

Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.
Gently separate the case so none of the cords inside are disconnected

3 단계 Separated Device

Munchkinz Volume Button assembly, Separated Device: 3 단계, 이미지 1/1

After prying the device apart, it should look like this.

4 단계 Pry Camera

Munchkinz Volume Button assembly, Pry Camera: 4 단계, 이미지 1/1

Use the slim plastic opening tool to pry the camera from its initial position.

5 단계 Disconnect Ribbon

Munchkinz Volume Button assembly, Disconnect Ribbon: 5 단계, 이미지 1/1

Use the precision tweezers to gently disconnect the camera ribbon that is connected to the motherboard.

6 단계 Volume Button

Munchkinz Volume Button assembly, Volume Button: 6 단계, 이미지 1/1

Remove the plastic volume button.

7 단계 Unscrew Module

Munchkinz Volume Button assembly, Unscrew Module: 7 단계, 이미지 1/1

Remove the two screws that hold the volume button assembly in place.

8 단계 Solder Module Wires

Munchkinz Volume Button assembly, Solder Module Wires: 8 단계, 이미지 1/1

Un-solder the yellow, red, and black wires that connect the volume module to the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

David Wood

회원 가입일: 02/05/15

440 평판

안내서 4개 작성하였습니다

배지 +3개 더

팀

UW Tacoma, Team 3-6, Rose Winter 2015 UW Tacoma, Team 3-6, Rose Winter 2015 회원

UWT-ROSE-W15S3G6

3 회원들

안내서 14개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 267