주요 콘텐츠로 건너뛰기

NP-R540-JA09US Keyboard Replacement

필요한 것

  1. NP-R540-JA09US Keyboard Replacement, Battery: 1 단계, 이미지 1/1
    • Turn off laptop before starting.

    • Remove power cable before starting.

    • Flip the laptop over so that the bottom of the laptop is facing upwards.

  2. NP-R540-JA09US Keyboard Replacement: 2 단계, 이미지 1/1
    • Pull the two latches outward.

  3. NP-R540-JA09US Keyboard Replacement: 3 단계, 이미지 1/2 NP-R540-JA09US Keyboard Replacement: 3 단계, 이미지 2/2
    • Slide the battery out of the laptop.

  4. NP-R540-JA09US Keyboard Replacement, Optical Drive: 4 단계, 이미지 1/1
    • Remove securing screw with the PH0 head.

  5. NP-R540-JA09US Keyboard Replacement: 5 단계, 이미지 1/1
    • Slide the optical drive out and remove it from the device.

  6. NP-R540-JA09US Keyboard Replacement, Keyboard: 6 단계, 이미지 1/1
    • Remove the two Phillips #0 screws labeled KBD.

    • There are 5 clips along the top of the keyboard. Insert a thin opener tool (iSessamo tool or similar) between each clip and the keyboard tray to release it.

    • Make sure to pry the metal keyboard base and not the keycaps.

  7. NP-R540-JA09US Keyboard Replacement: 8 단계, 이미지 1/1
    • Do not bend your keyboard as shown in this picture.

    • Lift the keyboard up to release catches on the sides, then slide the keyboard towards the screen to slide tabs out of the slots at the bottom.

  8. NP-R540-JA09US Keyboard Replacement: 9 단계, 이미지 1/2 NP-R540-JA09US Keyboard Replacement: 9 단계, 이미지 2/2
    • Disconnect the keyboard cable from the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Derek Wheeler

회원 가입일: 09/21/18

251 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 16

전체 시간: 858