주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

부품

지정된 부품이 없습니다.

  1. Turn the Neo3DO face down so that the logo is facing toward you. Insert the plastic opening tool between the metal frame and the plastic back panel, as shown. Insert the plastic opening tool between the metal frame and the plastic back panel, as shown.
    • Turn the Neo3DO face down so that the logo is facing toward you.

    • Insert the plastic opening tool between the metal frame and the plastic back panel, as shown.

  2. Gently pry the back panel upwards. Ensure the tool does not slip into the device and damage the internals.
    • Gently pry the back panel upwards.

    • Ensure the tool does not slip into the device and damage the internals.

  3. Once the back panel has been pried away from the bottom and sides of the Neo3DO, lift the back panel up and away from the tablet. Once the back panel has been pried away from the bottom and sides of the Neo3DO, lift the back panel up and away from the tablet.
    • Once the back panel has been pried away from the bottom and sides of the Neo3DO, lift the back panel up and away from the tablet.

  4. When replacing the back panel, place the top edge of the back panel against the top edge of the Neo3DO, as shown.
    • When replacing the back panel, place the top edge of the back panel against the top edge of the Neo3DO, as shown.

    • The top edge of the device is the edge closest to the camera. The top of the back panel is the side with the hole for the camera.

  5. Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector. Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector. Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector.
    • Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector.

  6. Pull the wire completely from the socket.
    • Pull the wire completely from the socket.

    • Check the metallic parts for signs of damage or corrosion. If either exists, you might need to replace the battery entirely.

  7. Re-insert the wire into the socket.
    • Re-insert the wire into the socket.

  8. Using the tweezers, push the black tabs back in. Using the tweezers, push the black tabs back in. Using the tweezers, push the black tabs back in.
    • Using the tweezers, push the black tabs back in.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Michael Whitehead

회원 가입일: 2016년 09월 26일

201 평판

안내서 2개 작성하였습니다

USF Tampa, Team 14-3, Eyestone Fall 2016 USF Tampa, Team 14-3, Eyestone Fall 2016 회원

USFT-EYESTONE-F16S14G3

3 회원들

안내서 12개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 73