Remove the screw located near the speaker port using a Phillips 00 screwdriver.
  • Remove the screw located near the speaker port using a Phillips 00 screwdriver.

댓글 쓰기

Turn camera upside down so that the battery compartment is facing you.
  • Turn camera upside down so that the battery compartment is facing you.

  • Remove all four screws from the bottom of the camera with a Phillips 00 screwdriver.

댓글 쓰기

Rotate the camera to the opposite side where the A/V outlet is located.
  • Rotate the camera to the opposite side where the A/V outlet is located.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

댓글 쓰기

Turn the camera so that the Wi-Fi adapter is facing you.
  • Turn the camera so that the Wi-Fi adapter is facing you.

  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

댓글 쓰기

아버지의 날 선물 안내
아버지 뿐만 아니라 다른 분들도 존중합시다—우리에게 수리하는 법을 가르쳐 주신 모든 멘토를 축하합시다.
아버지의 날 선물 안내
우리에게 수리하는 법을 가르쳐 주신 사람들을 존중합시다.
Using a plastic opening tool, pry the front casing of the camera. Continue this motion all around the front casing of the camera. Gently pull apart the front casing from the rest of the camera.
  • Using a plastic opening tool, pry the front casing of the camera.

  • Continue this motion all around the front casing of the camera.

  • Gently pull apart the front casing from the rest of the camera.

댓글 쓰기

Using the plastic opening tool pry the back casing of the camera.
  • Using the plastic opening tool pry the back casing of the camera.

댓글 쓰기

Orange ribbon is fragile
  • Orange ribbon is fragile

  • Carefully pull apart the back casing of the camera from the front of the camera without tearing the orange ribbon.

댓글 쓰기

Pull down the on the black latch to carefully separate the orange ribbon from the motherboard. Pull apart the orange ribbon and front casing from the rest of the camera.
  • Pull down the on the black latch to carefully separate the orange ribbon from the motherboard.

  • Pull apart the orange ribbon and front casing from the rest of the camera.

댓글 쓰기

Use plastic opening tool to carefully pry the LCD Screen from the camera. Use plastic opening tool to carefully pry the LCD Screen from the camera.
  • Use plastic opening tool to carefully pry the LCD Screen from the camera.

댓글 쓰기

Gently pull the ribbon cable down to release the latch, then pull up to remove it from the motherboard. Gently pull the ribbon cable down to release the latch, then pull up to remove it from the motherboard.
  • Gently pull the ribbon cable down to release the latch, then pull up to remove it from the motherboard.

댓글 쓰기

De-solder the black and red wires from the mainboard.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Joshua Avery

회원 가입일: 2012년 01월 23일

7 평판

안내서 3개 작성하였습니다

Cal Poly, Team 3-28, Amido Winter 2012 Cal Poly, Team 3-28, Amido Winter 2012 회원

CPSU-AMIDO-W12S3G28

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 976