소개
After you have successfully completed the faceplate and circuit board removal guide this guide will show you how to replace the speaker
필요한 것
-
-
Place your thumb on the middle of the back cover and push it toward the bottom of the phone to slide the cover off.
-
-
-
-
Insert the plastic opening tool into the crack between the front and back panels.
-
Gently pry the front cover away from the back cover while sliding the plastic opening tool towards the top of the phone.
-
-
-
Use the Torx screwdriver with the T6 attachmet to remove the 6 .4 mm screws around the outside of the circuit board.
-
-
-
Using the plastic opening tool, gently pry the speaker out of its slot in the back cover of the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 2명이 해당 안내서를 완성하였습니다.