소개

To complete this repair you will need a Torx number 4

부품

부품은 필요하지 않습니다.

Remove battery
  • Remove battery

댓글 쓰기

Using Torx number 4 unscrew the four  0.5mm screws.
  • Using Torx number 4 unscrew the four 0.5mm screws.

댓글 쓰기

  • Push in four clips to detach the body.

댓글 쓰기

  • Separate the body into two pieces.

  • Be careful not to damage the screen or body. Some force will be needed to separate the body.

댓글 쓰기

  • Remove the bottom piece that is clipped on.

  • Some force will need to be exerted to remove the clip.

댓글 쓰기

  • Using Torx number 4 unscrew the two 0.7 mm screws at the top of the device.

댓글 쓰기

  • Once screws are removed detach back of phone from the motherboard.

  • This will require some force and maneuvering. Be careful not to break phone back or motherboard.

댓글 쓰기

  • Replace motherboard, ensure that replacement has the same serial number.

댓글 쓰기

  • Carefully un-clip camera ribbon. Install new camera.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Will Goldby

회원 가입일: 2011년 08월 29일

184 평판

안내서 4개 작성하였습니다

Cuesta, Team 1-1, Zipperian Fall 2011 Cuesta, Team 1-1, Zipperian Fall 2011 회원

CUESTA-ZIPPERIAN-F11S1G1

3 회원들

안내서 4개 작성하였습니다

Will a Nokia E72 replacement camera part work in the Nokia E71 motherboard? In other words, can one upgrade the Nokia E71’s 3.2 MP camera to 5.0 MP using a spare part made for an E72?

Gam - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 2

전체 시간: 1,123