주요 콘텐츠로 건너뛰기

Nook Tablet Back Cover Replacement

필요한 것

  1. Nook Tablet Back Cover Replacement, Back Cover: 1 단계, 이미지 1개 중 1개
    • Flip the Nook over.

  2. Nook Tablet Back Cover Replacement: 2 단계, 이미지 2개 중 1개 Nook Tablet Back Cover Replacement: 2 단계, 이미지 2개 중 2개
    • Lift the flap that reads "Nook" to reveal the tape that is underneath. Remove the memory card if one is present.

    • Remove the tape covering the round holes to reveal two T5 Torx screws.

    • Remove the two T5 Torx screws securing the back cover.

  3. Nook Tablet Back Cover Replacement: 3 단계, 이미지 2개 중 1개 Nook Tablet Back Cover Replacement: 3 단계, 이미지 2개 중 2개
    • Insert the flat end of a spudger between the front panel and the rear assembly.

    • Though these photos show a screwdriver, use a spudger or plastic opening tool in order to prevent damage to the device.

    • Use a spudger to lift the the back panel from the rest of the Nook.

  4. Nook Tablet Back Cover Replacement: 4 단계, 이미지 2개 중 1개 Nook Tablet Back Cover Replacement: 4 단계, 이미지 2개 중 2개
    • Slide the spudger around the edges of the Nook to loosen the back panel.

  5. Nook Tablet Back Cover Replacement: 5 단계, 이미지 1개 중 1개
    • Pull the back panel off the Nook.

결론

To reassemble your device, line up the piece that was removed with how it was on before and then just firmly press down till it snaps into place.

다른 5명이 해당 안내서를 완성하였습니다.

작성자

13다른 기여자 명과 함께

Jacob Metzinger

회원 가입일: 09/25/12

89 평판

안내서 2개를 작성함

Cal Poly, Team 1-4, Propen Fall 2012 Cal Poly, Team 1-4, Propen Fall 2012 회원

CPSU-PROPEN-F12S1G4

4 회원들

안내서 14개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 13

전체 시간: 6,177