소개

Splitting the case of the Mifi 2200 is necessary to be able access the internal parts. This is how to go about that.

부품

부품은 필요하지 않습니다.

Remove the rear cover by pressing down on the cover and pulling it away from the device.
  • Remove the rear cover by pressing down on the cover and pulling it away from the device.

댓글 쓰기

Place your finger on the back of the battery located near the edge of the device.
  • Place your finger on the back of the battery located near the edge of the device.

  • Push your finger into the battery and lift up to pop the battery out of the device.

댓글 쓰기

  • Using a metal spudger, pry open the device around the seam between the front and back cover.

  • It may be difficult to split apart, so use force with caution.

  • It may seem like you are breaking the device, but you will only be breaking the adhesive lining that keeps the device sealed.

댓글 쓰기

  • Once the seal has been broken all the way around, open the cases using your hands.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Justin Russo

회원 가입일: 2012년 04월 15일

196 평판

안내서 3개 작성하였습니다

Cal Poly, Team 7-36, Maness Spring 2012 Cal Poly, Team 7-36, Maness Spring 2012 회원

CPSU-MANESS-S12S7G36

5 회원들

안내서 5개 작성하였습니다

If case gets damaged, is there a place to but the case

Snehraj Merchant - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 1,364