소개

Step by step instructions to clean or replace the control buttons on the camera.

부품

부품은 필요하지 않습니다.

  1. Before disassembling your camera, be sure it is powered off.
    • Before disassembling your camera, be sure it is powered off.

    • Remove two screws from the video port located at the side panel of the camera.

    • Remove three screws from the bottom panel of the camera.

    댓글 쓰기

  2. Open the USB port cover, and remove three screws from inside.
    • Open the USB port cover, and remove three screws from inside.

    • Next, open the memory slot cover and remove the screw.

    댓글 쓰기

    • Use the blue opening tool to loosen and separate the back cover from the camera.

    댓글 쓰기

    • Locate and unscrew the three screws inside the back cover body (picture 3) .

    • Remove button pad assembly from the back cover.

    댓글 쓰기

    • The button assembly is now separate from the back cover.

    • Inspect for broken areas. Replace or clean the button parts.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

GradStudents2011

회원 가입일: 2011년 09월 08일

21 평판

안내서 3개 작성하였습니다

University of Maine, Team 1-27, Diaz Fall 2011 University of Maine, Team 1-27, Diaz Fall 2011 회원

UMAINE-DIAZ-F11S1G27

1 회원

안내서 3개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 717