소개

This is instructions on how to open up the phone to get to the insides.

부품

부품은 필요하지 않습니다.

Press and slide open the battery cover.
  • Press and slide open the battery cover.

댓글 쓰기

Caution: Turn cell phone off before removing battery!
  • Caution: Turn cell phone off before removing battery!

  • Press battery to the right.

  • Then lift up battery pack to remove.

댓글 쓰기

  • Phone with battery removed

댓글 쓰기

  • Remove the touchpad pen from the top left corner on the back to reveal the last of 6 screws to be removed.

댓글 쓰기

    • Lift the rubber cap at the top right to reveal the sixth screw.

    • Caution: There is a small Palm sticker under the rubber cap. Tampering with or removing this sticker will void your warranty!

    • Remove the six screws using the T5 Torx screwdriver.

댓글 쓰기

  • Remove the SIM card so housing can be separated.

댓글 쓰기

  • Use a plastic pry tool to separate the bottom of the case to remove the small plastic insert.

댓글 쓰기

  • Remove the small plastic insert at the bottom of the phone.

댓글 쓰기

  • Continue with plastic pry tool all the way around the phone to remove the back housing.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Chelsea Barackman

회원 가입일: 2010년 04월 13일

42 평판

안내서 3개 작성하였습니다

Cal Poly, Team 15-49, Garner Spring 2010 Cal Poly, Team 15-49, Garner Spring 2010 회원

CPSU-GARNER-S10S15G49

5 회원들

안내서 12개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 3,615