주요 콘텐츠로 건너뛰기

소개

In this guide you will learn how to install a battery into your Palm Treo Pro.

도구

지정된 도구가 없습니다.

  1. Press down and forward on the back case to slide it out of place and remove it Press down and forward on the back case to slide it out of place and remove it Press down and forward on the back case to slide it out of place and remove it
    • Press down and forward on the back case to slide it out of place and remove it

  2. If a battery is already installed, remove it by pulling up on the tab near the camera lens.
    • If a battery is already installed, remove it by pulling up on the tab near the camera lens.

    • Insert the new battery into the open rectangle. Make sure the battery is oriented so that the Palm logo is in the upper-left corner opposite the camera lens

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Kyle Gilbert

회원 가입일: 2013년 04월 17일

1 평판

안내서 2개 작성하였습니다

Cal Poly, Team 8-59, Johann Spring 2013 Cal Poly, Team 8-59, Johann Spring 2013 회원

CPSU-JOHANN-S13S8G59

4 회원들

안내서 12개 작성하였습니다

From where i can get new for this palm treo pro ?

M Masood anwer - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 462