주요 콘텐츠로 건너뛰기

Pantech Matrix Camera Button Replacement

필요한 것

  1. Pantech Matrix Camera Button Replacement, Phone Orientation: 1 단계, 이미지 1개 중 1개
    • Place phone with screen side facing toward you.

  2. Pantech Matrix Camera Button Replacement, Phone Orientation: 2 단계, 이미지 1개 중 1개
    • Flip phone over so screen side is now facing down.

  3. Pantech Matrix Camera Button Replacement, Remove Back Cover: 3 단계, 이미지 2개 중 1개 Pantech Matrix Camera Button Replacement, Remove Back Cover: 3 단계, 이미지 2개 중 2개
    • Gently slide the backside phone cover off exposing the battery underneath.

  4. Pantech Matrix Camera Button Replacement, Lift Battery: 4 단계, 이미지 1개 중 1개
    • Carefully lift the battery up from where the spudger is pointed.

  5. Pantech Matrix Camera Button Replacement, Remove Battery: 5 단계, 이미지 1개 중 1개
    • Remove the battery from its dock.

  6. Pantech Matrix Camera Button Replacement, Slide SIM Card Out: 6 단계, 이미지 3개 중 1개 Pantech Matrix Camera Button Replacement, Slide SIM Card Out: 6 단계, 이미지 3개 중 2개 Pantech Matrix Camera Button Replacement, Slide SIM Card Out: 6 단계, 이미지 3개 중 3개
    • Slide the SIM Card out of its dock.

  7. Pantech Matrix Camera Button Replacement, Remove Phone Screws: 7 단계, 이미지 2개 중 1개 Pantech Matrix Camera Button Replacement, Remove Phone Screws: 7 단계, 이미지 2개 중 2개
    • Use a Phillips screwdriver to remove the four 2mm Phillips #000 screws from each corner of the device.

  8. Pantech Matrix Camera Button Replacement, Identify and Remove Phone Casing: 8 단계, 이미지 2개 중 1개 Pantech Matrix Camera Button Replacement, Identify and Remove Phone Casing: 8 단계, 이미지 2개 중 2개
    • Rotate the phone so the base is facing you.

    • Use spudger to separate phone casing and inside as shown.

    • Remove the casing carefully and set aside.

  9. Pantech Matrix Camera Button Replacement, Remove Camera Screws: 9 단계, 이미지 2개 중 1개 Pantech Matrix Camera Button Replacement, Remove Camera Screws: 9 단계, 이미지 2개 중 2개
    • Place phone with exposed motherboard facing you.

    • Use a Phillips screwdriver to remove the five 2mm Phillips #000 screws holding the camera in place.

  10. Pantech Matrix Camera Button Replacement, Identify and Remove Camera Button: 10 단계, 이미지 2개 중 1개 Pantech Matrix Camera Button Replacement, Identify and Remove Camera Button: 10 단계, 이미지 2개 중 2개
    • Carefully remove the motherboard to expose the camera button.

    • Grasp the camera button with a polypus and pull gently to remove the camera button.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

3다른 기여자 명과 함께

Zeel Patel

회원 가입일: 10/13/14

1,096 평판

안내서 9개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 9

전체 시간: 228