주요 콘텐츠로 건너뛰기

Polaroid Automatic 100 Bottom Frame Spring Replacement

필요한 것

  1. Polaroid Automatic 100 Bottom Frame Spring Replacement, Bottom Frame Spring Replacement: 1 단계, 이미지 1/3 Polaroid Automatic 100 Bottom Frame Spring Replacement, Bottom Frame Spring Replacement: 1 단계, 이미지 2/3 Polaroid Automatic 100 Bottom Frame Spring Replacement, Bottom Frame Spring Replacement: 1 단계, 이미지 3/3
    • Fully extend the bellows to prevent collapse using the #1 tab.

    • Remove the camera cover in order to make the camera easier to work with.

    • When collapsing bellows, press down on the metal frame above the bellows.

  2. Polaroid Automatic 100 Bottom Frame Spring Replacement: 2 단계, 이미지 1/1
    • Remove the Phillips #0 6mm screw on the shutter mount and the washers using a size 5 nut driver.

  3. Polaroid Automatic 100 Bottom Frame Spring Replacement: 3 단계, 이미지 1/1
    • Unscrew the 4.5 mm Phillips screw on the right with a Phillips #0 Screwdriver.

  4. Polaroid Automatic 100 Bottom Frame Spring Replacement: 4 단계, 이미지 1/3 Polaroid Automatic 100 Bottom Frame Spring Replacement: 4 단계, 이미지 2/3 Polaroid Automatic 100 Bottom Frame Spring Replacement: 4 단계, 이미지 3/3
    • Remove the spring from the shutter mount.

    • The hooks on the ends of the spring within the shutter mount may recoil when being removed, and may be sharp enough to puncture skin.

    • When reassembling, getting the smaller screw on the right hand side can be challenging. It may be helpful to tip the camera upside down so that gravity helps the screw fall into place.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Katie Miller

회원 가입일: 04/14/15

680 평판

안내서 5개 작성하였습니다

Cal Poly, Team 4-3, Maness Spring 2015 Cal Poly, Team 4-3, Maness Spring 2015 회원

CPSU-MANESS-S15S4G3

4 회원들

안내서 6개 작성하였습니다

댓글 한 개

Thank you so very much!!!

You saved my camera and my sanity!!!!

CAROL HOLDER - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 11

전체 시간: 1,067