주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

If you need to replace the film roller, access the inside of the camera using this guide. You may need to replace the roller if the pictures are jammed or if the roller is broken. For this guide you will not need to do any difficult steps, but you will need tweezers.

부품

지정된 부품이 없습니다.

  1. Pull the hinge button over to open the camera.
    • Pull the hinge button over to open the camera.

  2. Remove the left and right springs with a pair of tweezers. Remove the left and right springs with a pair of tweezers.
    • Remove the left and right springs with a pair of tweezers.

  3. Lift out the top roller. The gold and black pieces will remain attached to the roller.
    • Lift out the top roller. The gold and black pieces will remain attached to the roller.

결론

To reassemble your device, follow these instructions in reverse order.

다른 10명이 해당 안내서를 완성하였습니다.

Abby Boucher

회원 가입일: 2018년 09월 10일

718 평판

안내서 5개 작성하였습니다

University of Alabama, Team S1-G1, Bedsole Fall 2018 University of Alabama, Team S1-G1, Bedsole Fall 2018 회원

UA-BEDSOLE-F18S1G1

4 회원들

안내서 5개 작성하였습니다

Hi @abbyboucher Thanks a lot for the tutorial! Do you know where can I find the spare parts like the rollers, springs or the small plastics parts that are around?My Onestep+ fell to the ground and I lost some of those small parts.

Thanks

Joe

Joe Var - 답글

Thank you so much for this tutorial! I couldn’t find a place that would fix my camera and I literally just bought it a month ago! Already gutted that I couldn’t bring it on my Christmas holiday, I almost gave up when repair shops told me I would have to contact Polaroid.. thank you so so much!

drummagal7 - 답글

thank you very very muttz

stinka007 - 답글

any tips to put the springs back in place after taking one out?

ekw664 - 답글

댓글 쓰기

조회 통계:

24 시간 전: 13

7일 전: 49

30일 전: 284

전체 시간: 6,021