수리 커뮤니티 가입 - 계정 만들기

소개

The power button on the PTAB7XC is made of plastic and frequently breaks; luckily, replacing the power button is a quick and easy process for even beginners.

필요한 것

1 단계 Power Button

Polaroid PTAB7XC Power Button Replacement, Power Button: 1 단계, 이미지 2개 중 1개

Polaroid PTAB7XC Power Button Replacement, Power Button: 1 단계, 이미지 2개 중 2개

Remove the two 7 mm screws on the top of the device using a J00 Phillips screwdriver by turning them counterclockwise.
If the screw heads have corroded or been stripped, it may be necessary to use a larger screwdriver head, such as the J0.

번역하기

FixBot에 문의하기

2 단계

Pry the seam between the screen and the case on all four sides with a large plastic opening tool until the plastic case comes off.
The plastic case is now free from the device.
The plastic power button may or may not fall out at this point. There is no problem if it does.

번역하기

FixBot에 문의하기

3 단계

이 단계에 사용된 도구:

Tweezers

$4.99

구매

Use tweezers to push on the side of the black plastic power button that is outside of the device case until the button is as far in as possible.
Pull on the part of the broken power button that is exposed on the inside of the device case using tweezers until the button itself comes loose of the case.
The power button is now replaceable.