주요 콘텐츠로 건너뛰기

Polycom SoundStation Back Housing Replacement

필요한 것

  1. Polycom SoundStation Back Housing Replacement, Back Housing: 1 단계, 이미지 1/1
    • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

    • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

  2. Polycom SoundStation Back Housing Replacement: 2 단계, 이미지 1/2 Polycom SoundStation Back Housing Replacement: 2 단계, 이미지 2/2
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

결론

To reassemble your device, follow these instructions in reverse order.

Cali Nowak Credit

회원 가입일: 09/02/14

431 평판

안내서 4개 작성하였습니다

USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 회원

USFSM-STEWART-F14S1G3

3 회원들

안내서 14개 작성하였습니다

댓글 한 개

thanks for this - the 7mm were under footpads so I couldn’t see them. cover now off, keyboard dried of coffee and working fine again!!

J M - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 7

전체 시간: 1,153