소개

Two RAM slots allow up to 1 GB of PC100 or PC133 RAM.

Remove the battery.
  • Remove the battery.

  • Turn the keyboard locking screw so that it is parallel to the space bar.

  • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

댓글 쓰기

Rest the keyboard face down on the trackpad area.
  • Rest the keyboard face down on the trackpad area.

  • Disconnect the keyboard connector from the logic board.

댓글 쓰기

  • Your laptop should look approximately like this.

댓글 쓰기

  • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

  • Pull the RAM chip out.

  • Repeat this process if a second RAM chip is installed.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 13명이 해당 안내서를 완성하였습니다.

첨부 문서

iRobot

회원 가입일: 2009년 09월 24일

1 평판

안내서 621개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 2

지난 30일: 9

전체 시간: 8,593