소개
If your device will not turn on at all, use this guide to replace your dead or dying battery and make your device functional again.
필요한 것
-
-
Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.
FixBot에 문의하기
-
-
-
이 단계에 사용된 도구:Tweezers$4.99
-
Use a soldering tool and tweezers to remove the black and red wire from the motherboard.
-
-
-
Using the flat end of a spudger, carefully separate the battery from the base of the device.
-
To reassemble your device, follow these instructions in reverse order.
다른 3명이 해당 안내서를 완성하였습니다.
팀
Eastern Washington University, Team 1-4, Rowley Winter 2016 Eastern Washington University, Team 1-4, Rowley Winter 2016 회원
EWU-ROWLEY-W16S1G4
4 회원들
안내서 10개를 작성함
