소개
If your screen is cracked or not working at all, use this guide to replace it.
필요한 것
-
-
Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.
FixBot에 문의하기
-
-
-
-
Insert a spudger under the black tape that connects the silver wire to the interior of the front panel
-
Pull back the black tape with the spudger until it can be lifted up with your fingers.
-
Use your fingers to grab and lift the remainder of the black tape from device panel.
-
-
-
Use a plastic opening tool to push back the ZIF connector to release the ribbon wire on the motherboard.
-
-
-
Insert an opening tool underneath the silver base of the internal device element.
-
Use the opening tool to pry the element out of the case that holds the screen.
-
To reassemble your device, follow these instructions in reverse order.
다른 6명이 해당 안내서를 완성하였습니다.
팀
Eastern Washington University, Team 1-4, Rowley Winter 2016 Eastern Washington University, Team 1-4, Rowley Winter 2016 회원
EWU-ROWLEY-W16S1G4
4 회원들
안내서 10개를 작성함
