메인 콘텐츠로 스킵하기

소개

This guide will lead you through the steps necessary to access the screen's components as well as how to assure it is properly connected.

부품

지정된 부품이 없습니다.

  1. Flip the device over
    • Flip the device over

  2. Unscrew the 2 screws closest to the screen
    • Unscrew the 2 screws closest to the screen

  3. Flip the device back over
    • Flip the device back over

    • It is now standing right side up

  4. Unscrew the top.
    • Unscrew the top.

  5. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  6. Take the top of the device off.
    • Take the top of the device off.

  7. Unscrew the button board.
    • Unscrew the button board.

  8. Take off the button board.
    • Take off the button board.

  9. Unscrew all visible screws on the black logic board cover.
    • Unscrew all visible screws on the black logic board cover.

  10. Lift the screen straight up out of the device.
    • Lift the screen straight up out of the device.

  11. Check that the single input plug from the logic board  to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.
    • Check that the single input plug from the logic board to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.

    • Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.

    • You have successfully reconnected your display screen.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Nick Sherman

회원 가입일: 2012년 09월 26일

31 평판

안내서 1개 작성함

Cal Poly, Team 7-50, Forte Fall 2012 Cal Poly, Team 7-50, Forte Fall 2012 회원

CPSU-FORTE-F12S7G50

5 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 350