1 단계 RAM



• Place the laptop on a fat surface with the underside facing up
• Remove the 4 Philips head screws.
• Turn the computer over and open the display
• Grasping each side of the palm rest, gently lift it off and rotate toward the front of the laptop
• The palm rest will be connected to the main board by a ribbon cable
번역하기
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
2 단계

• Disconnect the touchpad ribbon cable
• This step is recommended in the service manual however it is possible to remove the RAM without discoinnecting the touchpad cable
번역하기
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
3 단계
• Locate the RAM modules
• Gently press the metal tabs outwards to release the top RAM module and remove it from the laptop
• With the top RAM module removed you can release the lower RAM module in the same manner.
번역하기
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기

해당 안내서 넣기

해당 안내서를 사이트/포럼에 작은 위젯으로 포함하려면 크기를 선택하고 아래 코드를 복사하십시오.

<iframe id="dozuki-embed-14746" src="https://ko.ifixit.com/Guide/embed/14746/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-14746"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://ko.ifixit.com/Guide/embed/14746" width="800" height="584" allowfullscreen frameborder="0"></iframe>

미리보기