소개

Only requires removing a few screws. No special tools required.

부품

부품은 필요하지 않습니다.

Flip the camera so that the bottom is facing you.
  • Flip the camera so that the bottom is facing you.

  • Take a spare coin and unscrew the battery cover off.

댓글 쓰기

Remove the batteries, making sure to note their proper alignment.
  • Remove the batteries, making sure to note their proper alignment.

댓글 쓰기

  • Remove two 4.8mm screws.

  • Remove one 3.4mm screw.

  • Remove one 2.65mm screw.

  • Lift off the back cover.

댓글 쓰기

  • Remove three 3.5mm screws.

  • Remove two 3.8mm screws.

  • Remove one 6.35mm screw.

  • Remove one 4mm screw. Lift off the disk.

  • Remove one 5.11mm screw.

댓글 쓰기

  • Lift up the silver, metal piece

  • Please note that some internal pieces may come loose during this process.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Nick

회원 가입일: 2011년 04월 19일

411 평판

안내서 4개 작성하였습니다

Cal Poly, Team 8-7, Regan Spring 2011 Cal Poly, Team 8-7, Regan Spring 2011 회원

CPSU-REGAN-S11S8G7

4 회원들

안내서 4개 작성하였습니다

good advice, will use, have multiple Minolta cameras to work with.

gabriel johnson - 답글

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 10

지난 30일: 47

전체 시간: 7,914