주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

동영상 개요

  1. Heat the back cover to melt the strong adhesive sticker underneath.
    • Heat the back cover to melt the strong adhesive sticker underneath.

  2. Try to pull and open a gap between back cover and  frame after heat. Insert into a guitar pick to cut the sticker.
    • Try to pull and open a gap between back cover and frame after heat. Insert into a guitar pick to cut the sticker.

  3. If you do it hardly, you need much more heat especially the edged side.
    • If you do it hardly, you need much more heat especially the edged side.

    • Slipping a playing card through the gap is a good way to loosen up the adhesive.

  4. Remove the back cover. The white stripe is the sticker.
    • Remove the back cover. The white stripe is the sticker.

결론

To reassemble your device, follow these instructions in reverse order.

다른 44명이 해당 안내서를 완성하였습니다.

Sophia

회원 가입일: 2014년 03월 25일

43,234 평판

안내서 62개 작성하였습니다

What about putting the one back on?

rcf917 - 답글

will it go back on and stay on without new adhesive?

dfasdfjiun - 답글

I suggest that you take new adhesive, old adhesive is not strong enough to hold back cover.

Witrigs -

You can check this video of put it back battery cover : https://www.youtube.com/watch?v=3HrmeVGY...

Witrigs - 답글

How do I remove the sticky part

Marcelino Lopez - 답글

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 25

30일 전: 108

전체 시간: 106,204