Scuf Reflex L1 and R1 Bumper Replacement - iFixit 수리 안내서

소개

Use this guide to replace or remove the L1 and R1 bumpers on your Scuf Reflex controller.

필요한 것

1 단계 Pry up the R1 bumper

Scuf Reflex L1 and R1 Bumper Replacement, Pry up the R1 bumper: 1 단계, 이미지 1/3

Scuf Reflex L1 and R1 Bumper Replacement, Pry up the R1 bumper: 1 단계, 이미지 2/3

Scuf Reflex L1 and R1 Bumper Replacement, Pry up the R1 bumper: 1 단계, 이미지 3/3

Before starting repairs, turn off your device and unplug any cables.
Insert the flat end of a spudger between the faceplate and the R1 bumper.
Pry up with the spudger to release the clips securing the bumper.

2 단계 Remove the R1 bumper

Scuf Reflex L1 and R1 Bumper Replacement, Remove the R1 bumper: 2 단계, 이미지 1/2

Scuf Reflex L1 and R1 Bumper Replacement, Remove the R1 bumper: 2 단계, 이미지 2/2

Remove the R1 bumper.

3 단계 Pry up the L1 bumper

Scuf Reflex L1 and R1 Bumper Replacement, Pry up the L1 bumper: 3 단계, 이미지 1/3

Scuf Reflex L1 and R1 Bumper Replacement, Pry up the L1 bumper: 3 단계, 이미지 2/3

Scuf Reflex L1 and R1 Bumper Replacement, Pry up the L1 bumper: 3 단계, 이미지 3/3

Insert the flat end of a spudger between the faceplate and the L1 bumper.
Pry up with the spudger to release the clips securing the bumper.

4 단계 Remove the L1 bumper

Scuf Reflex L1 and R1 Bumper Replacement, Remove the L1 bumper: 4 단계, 이미지 1/2

Scuf Reflex L1 and R1 Bumper Replacement, Remove the L1 bumper: 4 단계, 이미지 2/2

Remove the L1 bumper.
To reinstall the bumpers, place them in their original position and firmly push them into place.

결론

To reassemble your device, follow the instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

Dominik Schnabelrauch

회원 가입일: 11/23/16

205,109 평판

안내서 682개 작성하였습니다

배지 +37개 더

팀

iFixit iFixit 회원

Staff

136 회원들

안내서 17,430개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 2

7일 전: 12

30일 전: 60

전체 시간: 823