소개

This guide provides instruction for installing a motherboard for the Sony Ericsson TM506 cell phone.

부품

부품은 필요하지 않습니다.

Firmly hold the phone between your fingers with your thumb on the battery cover.
  • Firmly hold the phone between your fingers with your thumb on the battery cover.

  • Push down with your thumb until the battery cover comes off.

댓글 쓰기

Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.
  • Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.

댓글 쓰기

  • Remove the two rubber casings for the top two screws with a plastic opening tool.

댓글 쓰기

  • Unscrew these two 5.4mm screws with a Torx T6 screwdriver.

댓글 쓰기

  • There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.

댓글 쓰기

  • The sound box is attached to the case by two snap hooks.

  • Lift the sound box up to remove it from the case.

댓글 쓰기

  • Locate the 80-pin connector.

  • Carefully, lift up on the connector to separate it from the board.

댓글 쓰기

  • There are two snap hooks that attach the motherboard to the case.

  • Using a plastic opening tool, carefully lift up on the motherboard to detach it.

  • The motherboard is extremely fragile. Try to be forceful yet delicate in the removal because it will not come off easily.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Daniel

회원 가입일: 2012년 06월 20일

71 평판

안내서 14개 작성하였습니다

Cal Poly, Team 1-1, Regan SU 2012 Cal Poly, Team 1-1, Regan SU 2012 회원

CPSU-REGAN-SU12S1G1

2 회원들

안내서 16개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 982