소개

Replacing the lens mount requires removing any lens that is already attached then simply removing the casing of the lens mount.

부품

부품은 필요하지 않습니다.

  1. Hold lens and camera securely with two hands.
    • Hold lens and camera securely with two hands.

    • With the hand holding the camera, push down on the lens button. Twist the lens counterclockwise and pull out to release lens.

    댓글 쓰기

  2. Using your screwdriver, remove the four (3.5 mm) Phillips screws on the front face of the lens mount.
    • Using your screwdriver, remove the four (3.5 mm) Phillips screws on the front face of the lens mount.

    • Make sure to keep track of these screws and not misplace them.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Remove the silver plate by gently pinching with your fingers.

    댓글 쓰기

    • Now the black plate should be exposed. You can remove this again by gently pinching with your fingers and lifting up.

    댓글 쓰기

    • Using the tweezers, grab the thin silver ring and lift up.

    댓글 쓰기

    • The camera mount should now be barren and look like this.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Emily Trujillo

회원 가입일: 2014년 04월 08일

1,081 평판

안내서 6개 작성하였습니다

Cal Poly, Team 8-9, Regan Spring 2014 Cal Poly, Team 8-9, Regan Spring 2014 회원

CPSU-REGAN-S14S8G9

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 6

전체 시간: 1,847