1 단계 Battery

• Before disassembling the speaker, make sure it is powered off.
• Place the speaker on a flat surface.
• Take your blue plastic opening tool and remove the outside cover.
편집
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
2 단계

• Reorient the speaker so the black panel is facing up.
• Remove the 4, 0.9 cm screws from the back panel using a Phillips PH1 screwdriver.
• Now remove the plate.
편집
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
3 단계
• Reorient the speaker so the bottom is facing up.
• Remove the 4, 0.9cm screws from the bottom using a Phillips PH0 screw driver.
• Now open the plate.
편집
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
4 단계
• With the bottom plate removed now use the blue plastic opening tool to lift up the circuit board from the device.
편집
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
5 단계
• Disconnect the battery wires from the circuit board.
편집
댓글 1개
댓글 달기
댓글 쓰기
1024
취소 댓글 달기
6 단계
• Reorient the speaker so the back side is facing up.
• Now that the battery wires have been disconnected, use a blue plastic tool to release the battery from the adhesive strip.
• Loop the battery wires through the opening in the back plate.
• The battery and it's connective wires have been completely removed from the speaker.
편집
댓글 달기
댓글 달기
댓글 쓰기
1024
취소 댓글 달기

해당 안내서 넣기

해당 안내서를 사이트/포럼에 작은 위젯으로 포함하려면 크기를 선택하고 아래 코드를 복사하십시오.

<iframe id="dozuki-embed-60759" src="https://ko.ifixit.com/Guide/embed/60759/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-60759"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://ko.ifixit.com/Guide/embed/60759" width="800" height="584" allowfullscreen frameborder="0"></iframe>

미리보기