기기를 수리하세요 커뮤니티 상점

Speed Switch

소개

The purpose of this guide to provide simple and straight-forward instruction on replacing a damaged or jammed speed switch.

필요한 것

  1. Speed Switch, Switch: 1 단계, 이미지 1/2 Speed Switch, Switch: 1 단계, 이미지 2/2

    • Use a phillips head screwdriver to unscrew the following 8 screws:

    • One 24mm Phillips screw

    • Six 16mm Phillips screws

    • One 9mm Phillips screw

    • Turn the drill to the other side and unscrew the marked screw using the same phillips head screwdriver. Place it with the other removed screws.

    • Keep all screws organized on a magnetic mat after removal.

    편집

  3. Speed Switch: 2 단계, 이미지 1/3 Speed Switch: 2 단계, 이미지 2/3 Speed Switch: 2 단계, 이미지 3/3

    • Carefully remove the plastic drill casing by pulling it apart.

    • When separating the drill casing, the black plastic speed switch covering will be removed from the drill automatically.

    편집

  4. Speed Switch: 3 단계, 이미지 1/2 Speed Switch: 3 단계, 이미지 2/2

    • Gently remove the orange plastic speed switch from the drill. It is located right above the motor.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Dalton Johnson

회원 가입일: 01/31/16

337 평판

안내서 3개 작성하였습니다

배지: 11

배지 +8개 더

팀

University of Alabama, Team 1-8, Sydow campbell Spring 2016 University of Alabama, Team 1-8, Sydow campbell Spring 2016 회원

UA-SYDOW CAMPBELL-S16S1G8

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 2

전체 시간: 982