소개

Use this guide when you need to replace the battery because it has died.

부품

부품은 필요하지 않습니다.

  1. Remove the four Torx T5 screws from the back panel.
    • Remove the four Torx T5 screws from the back panel.

    댓글 쓰기

  2. Wedge a spudger in between the front and back panel.
    • Wedge a spudger in between the front and back panel.

    • Apply leverage downwards to the spudger in order to remove the back panel.

    댓글 쓰기

    • Slide the battery out from under the brown wire-tape.

      • Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.

    댓글 쓰기

    • Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.

    댓글 쓰기

결승점

다른 한 분이 해당 안내서를 완성하였습니다.

Daniel Wiseman

회원 가입일: 2012년 01월 20일

127 평판

안내서 6개 작성하였습니다

Cal Poly, Team 10-33, Amido Winter 2012 Cal Poly, Team 10-33, Amido Winter 2012 회원

CPSU-AMIDO-W12S10G33

4 회원들

안내서 8개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 778