주요 콘텐츠로 건너뛰기

VTech Baby's Learning Laptop Buttons Replacement

필요한 것

  1. VTech Baby's Learning Laptop Buttons Replacement, Battery and Rear Panel: 1 단계, 이미지 1개 중 1개
    • To remove the battery door, loosen the screw shown using a Phillips #2 screwdriver.

    • A coin can also be used to loosen the screw.

  2. VTech Baby's Learning Laptop Buttons Replacement: 2 단계, 이미지 1개 중 1개
    • Remove the battery door.

    • Take out the batteries.

  3. VTech Baby's Learning Laptop Buttons Replacement: 3 단계, 이미지 1개 중 1개
    • Remove the rear panel screws using a Phillips #2 screwdriver.

    • Two 21.6mm (Long)

    • One 9.8mm (Short)

    • Five 13.8mm (Medium)

  4. VTech Baby's Learning Laptop Buttons Replacement: 4 단계, 이미지 2개 중 1개 VTech Baby's Learning Laptop Buttons Replacement: 4 단계, 이미지 2개 중 2개
    • Gently pull up on the rear panel.

    • Be careful not to pull on the wire connections.

    • Rest the laptop open on the table.

  5. VTech Baby's Learning Laptop Buttons Replacement, Buttons: 5 단계, 이미지 1개 중 1개
    • Using a Phillips #0 screwdriver remove the two 6.0mm screws.

  6. VTech Baby's Learning Laptop Buttons Replacement: 6 단계, 이미지 2개 중 1개 VTech Baby's Learning Laptop Buttons Replacement: 6 단계, 이미지 2개 중 2개
    • Lift up on the board and set it aside.

    • Movement of the board will be limited. Be careful not to damage the connection to the motherboard.

  7. VTech Baby's Learning Laptop Buttons Replacement: 7 단계, 이미지 1개 중 1개
    • Remove each button and button contact.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

2다른 기여자 명과 함께

Christopher Kourmoulakis

회원 가입일: 09/03/15

412 평판

안내서 3개를 작성함

USF Tampa, Team 12-2, Blackwell Fall 2015 USF Tampa, Team 12-2, Blackwell Fall 2015 회원

USFT-BLACKWELL-F15S12G2

4 회원들

안내서 14개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 35

전체 시간: 1,141