기기를 수리하세요 커뮤니티 상점

VTech InnoTab 2s Back Panel Replacement

필요한 것

  1. VTech InnoTab 2s Back Panel Replacement, Back Panel: 1 단계, 이미지 1/1

    • Turn your device to where the back panel is facing you.

    편집

  2. VTech InnoTab 2s Back Panel Replacement: 2 단계, 이미지 1/2 VTech InnoTab 2s Back Panel Replacement: 2 단계, 이미지 2/2

    • Lift the Leg all the way up and twist the bottom to remove.

    • Once the bottom part pops out the whole leg should just come off.

    • Remove any game cartridge from the device.

    편집

  4. VTech InnoTab 2s Back Panel Replacement: 3 단계, 이미지 1/3 VTech InnoTab 2s Back Panel Replacement: 3 단계, 이미지 2/3 VTech InnoTab 2s Back Panel Replacement: 3 단계, 이미지 3/3

    • Remove all of the plastic tabs on the device. These are covering screws that will need to be removed.

    • These covers are made of hard plastic so they may be difficult to remove.

    • There is a special tab in the cartridge cover that is made of rubber, make sure to not break this tab.

    편집

  5. VTech InnoTab 2s Back Panel Replacement: 4 단계, 이미지 1/2 VTech InnoTab 2s Back Panel Replacement: 4 단계, 이미지 2/2

    • Remove all nine screws from the back of the device using a J0 bit.

    • Remove the small battery.

    편집

  6. VTech InnoTab 2s Back Panel Replacement: 5 단계, 이미지 1/2 VTech InnoTab 2s Back Panel Replacement: 5 단계, 이미지 2/2

    • Using a plastic opening tool, detach the backplate from the front piece.

    • Do not use excessive force. Double check that you removed all the screws if the panel is not coming off easily.

    • Once the backplate has been removed, you will have access to the circuit board.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Ricardo Espinosa

회원 가입일: 10/06/16

221 평판

안내서 2개 작성하였습니다

배지: 7

배지 +4개 더

팀

USF Tampa, Team 5-1, Lacy Fall 2016 USF Tampa, Team 5-1, Lacy Fall 2016 회원

USFT-LACY-F16S5G1

4 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 8

30일 전: 11

전체 시간: 251