주요 콘텐츠로 건너뛰기

Verizon Ellipsis 10 WiFi Module Replacement

필요한 것

  1. Verizon Ellipsis 10 WiFi Module Replacement, Back Cover: 1 단계, 이미지 1개 중 1개
    • Open the SD/SIM card cover to start prying off the back cover.

  2. Verizon Ellipsis 10 WiFi Module Replacement: 2 단계, 이미지 1개 중 1개
    • Start using the iFixit Opening Tool in the SD/SIM area to release the clips holding the back panel on.

  3. Verizon Ellipsis 10 WiFi Module Replacement: 3 단계, 이미지 1개 중 1개
    • Follow along the edge of the device to undo all of the retaining clips.

  4. Verizon Ellipsis 10 WiFi Module Replacement: 4 단계, 이미지 1개 중 1개
    • Once all the clips are undone, the back panel should come off with little effort.

  5. Verizon Ellipsis 10 WiFi Module Replacement, WiFi Module: 5 단계, 이미지 1개 중 1개
    • Locate Wi-Fi module in bottom right-hand corner.

  6. Verizon Ellipsis 10 WiFi Module Replacement: 6 단계, 이미지 1개 중 1개
    • Unscrew the M1.5 screw using a Phillips #00 screwdriver.

  7. Verizon Ellipsis 10 WiFi Module Replacement: 7 단계, 이미지 1개 중 1개
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    • Using a pair of tweezers or needle nose pliers, pull up the connecting wire.

    • Lift the module out.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

6다른 기여자 명과 함께

Mary Duran

회원 가입일: 04/03/19

606 평판

안내서 4개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 3

지난 30일: 8

전체 시간: 312